FordParts
My Garage
My Account
Cart
OEM 2007 Ford E-250 Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2007 Ford E-250 Reservoir Tank Part Number: 4C2Z-8A080-BC
$90.46 MSRP: $131.67You Save: $41.21 (32%)Product Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Manufacturer Note: #4C24-8A080-BC, #5C24-8A080-BA
- Replaces: 1C2Z-8A080-AA, 5U9Z-8A080-AA, F81Z-8A080-AB
- Base No.: 8A080
- Item Weight: 2.70 Pounds
- Item Dimensions: 9.4 x 9.6 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-8A080-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford E-250 Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford E-250 Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir on 2007 Ford E-250?A: Begin coolant reservoir service by ensuring engine safety through the prevention of unscrewing the pressure relief cap when the engine runs hot because an underpressure coolant system emits potentially dangerous steam bursts. Turn the pressure relief cap direction counterclockwise until it reaches one half turn before removing it. Hose clamp pliers should clamp down the lower degas bottle hose so you can use a suitable suction device to draw coolant from the degas bottle. Install gas engine degas bottle by disconnecting the single coolant hose connected to the upper section of the bottle. Follow the removal of bolts to place the degas bottle in position before tightening bolts to 6 Nm (53 inch lbs). Disconnect the lower degas bottle hose that supplies coolant and safely take out the degas bottle from the vehicle. When installation is complete follow the opposite steps of removal while filling the degas bottle.