Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right Outer; Lap & Shoulder Belt
Manufacturer Note: (-E*)
Position: Rear Outer Passenger Side
Replaces: 3C2Z-39611B68-AAA, 6C2Z-39611B68-AAA
Base No.: 611B68
Item Weight: 4.00 Pounds
Item Dimensions: 6.0 x 4.6 x 11.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 6C2Z-39611B68-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
2007 Ford E-250 Seat Belt
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Seat Belt available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Seat Belt as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford E-250 Seat Belt Parts Questions & Experts Answers
Q: Is a Seat Belt Inspection Necessary After Every Collision on 2007 Ford E-250?
A: Non-deployed seat belt system components need thorough examination following an accident. This includes retractors as well as belt tension sensors (BTS) when installed and buckles, shoulder belt height adjusters (if present), child safety seat tether connections, and their attachment hardware. All new belt assemblies need installation before a qualified technician proves the present assemblies are intact with no damage and normal operation state. Seat belt assemblies not engaged during the crash require examination and new ones must be installed when any form of damage or operational issue is detected because noncompliance increases the potential for future collision-related injuries. Seat belt assembly inspections should occur regularly to verify their proper working state following severe stress conditions. It is necessary to inspect the attachment points of a new seat belt assembly for damage along with distortion before implementation because repaired metal needs to return to its original state. Seat belt operation must be tested through the Seat Belt Functional Test after installing any new belt installation.