Should the LH Seat Belt Buckle Assembly Be Inspected After a Collision, and how to remove and install on 2006 Ford E-250?

After collisions, technicians must check all seat belt units starting from retractors up to belt tension sensors when equipped, as well as buckles, shoulder belt position adjusters when installed, and child seat tether anchors and their hardware attachments. If a qualified technician finds no damage in assemblies that operate correctly, then new belt assemblies can stay in place. An inspection should be conducted on all seat belt assemblies that stay unused during a vehicle impact. Professional installers should replace damaged or malfunctioning assemblies. The correct method to handle the LH seat belt buckle assembly requires bolt removal before assembly installation and final tightening at 40 Nm (30 lb-ft). Take out the bolt from the center seat belt tongue assembly before installation while tightening it to 40 Nm (30 lb-ft). Tighten the bolt from the RH seat belt buckle assembly to 40 Nm (30 lb-ft) when correctly installing it into its position. Before installing, the seat belt webbing needs to be untwisted, so the installation process must go in reverse order of removal steps. Active restraint system operation requires a final check before completing installation.

OEM 2006 Ford E-250 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Seat Belts found

View related parts
2006 Ford E-250 Lap & Shoulder Belt, Front Driver Side
Part Number: 6C2Z-15611B09-BA
$227.62 MSRP: $281.53
You Save: $53.91 (20%)
ADD TO CART
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Front Left
- Manufacturer Note: (-E*)
- Position: Front Driver Side
- Replaces: 2C2Z-15611B09-AAD, 2C2Z-15611B09-AAC, 6C2Z-15611B09-AAA, XC2Z-15611B09-AAC, XC2Z-15611B09-AAA
- Base No.: 611B09
- Item Weight: 3.60 Pounds
- Item Dimensions: 8.1 x 6.0 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-15611B09-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Lap & Shoulder Belt, Front Passenger Side
Part Number: 6C2Z-15611B08-BA
$186.68 MSRP: $271.73
You Save: $85.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Front Right
- Manufacturer Note: (-E*)
- Position: Front Passenger Side
- Replaces: 4C2Z-15611B08-AAC, 4C2Z-15611B08-AAD, 2C2Z-15611B08-AAC, 2C2Z-15611B08-AAD, 6C2Z-15611B08-AAA
- Base No.: 611B08
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.5 x 6.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-15611B08-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Passenger Side
Part Number: 6C2Z-16611B68-HA
$109.79 MSRP: $151.88
You Save: $42.09 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right Outer
- Manufacturer Note: (-E*)
- Position: Rear Outer Passenger Side
- Replaces: 6C2Z-16611B68-BAA
- Base No.: <611B68
- Item Weight: 4.40 Pounds
- Item Dimensions: 6.3 x 4.6 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B68-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Driver Side
Part Number: 6C2Z-16611B69-FA
$150.58 MSRP: $208.31
You Save: $57.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Left Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Driver Side
- Replaces: 3C2Z-16611B69-CAA, 6C2Z-16611B69-CAA
- Base No.: 611B69
- Item Weight: 4.20 Pounds
- Item Dimensions: 4.8 x 5.0 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B69-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Passenger Side
Part Number: 6C2Z-16611B68-JA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Passenger Side
- Replaces: 6C2Z-16611B68-CAA, 3C2Z-16611B68-CAA
- Base No.: 611B68
- Item Weight: 5.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B68-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Driver Side
Part Number: 6C2Z-16611B69-EB
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Left Outer; Lap & Shoulder Belt
- Manufacturer Note: (-W*)
- Position: Rear Outer Driver Side
- Replaces: 6C2Z-16611B69-BAB
- Base No.: <611B68
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B69-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Driver Side
Part Number: 6C2Z-39611B69-BA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Left Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Driver Side
- Replaces: 6C2Z-39611B69-AAA, 3C2Z-39611B69-AAA
- Base No.: 611B69
- Item Weight: 3.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-39611B69-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Passenger Side
Part Number: 6C2Z-16611B68-LA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Passenger Side
- Replaces: 6C2Z-16611B68-EAA
- Base No.: <611B68
- Item Weight: 4.00 Pounds
- Item Dimensions: 6.3 x 4.7 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B68-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Passenger Side
Part Number: 6C2Z-39611B68-BA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Passenger Side
- Replaces: 3C2Z-39611B68-AAA, 6C2Z-39611B68-AAA
- Base No.: 611B68
- Item Weight: 4.00 Pounds
- Item Dimensions: 6.0 x 4.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-39611B68-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Driver Side
Part Number: 6C2Z-16611B69-EA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Left Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Driver Side
- Replaces: 3C2Z-16611B69-BAA, 6C2Z-16611B69-BAA
- Base No.: 611B69
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B69-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Driver Side
Part Number: 6C2Z-16611B69-DA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Left Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Driver Side
- Replaces: 3C2Z-16611B69-AAA, 6C2Z-16611B69-AAA
- Base No.: 611B69
- Item Weight: 3.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B69-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2006 Ford E-250 Rear Seat, Outer Passenger Side
Part Number: 6C2Z-16611B68-KA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right Outer; Lap & Shoulder Belt
- Manufacturer Note: (-E*)
- Position: Rear Outer Passenger Side
- Replaces: 6C2Z-16611B68-DAA
- Base No.: <611B68
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16611B68-KA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford E-250 Seat Belt

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Seat Belt available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Seat Belt as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Seat Belt Parts Questions & Experts Answers

Q: Should the LH Seat Belt Buckle Assembly Be Inspected After a Collision, and how to remove and install on 2006 Ford E-250?
A: After collisions, technicians must check all seat belt units starting from retractors up to belt tension sensors when equipped, as well as buckles, shoulder belt position adjusters when installed, and child seat tether anchors and their hardware attachments. If a qualified technician finds no damage in assemblies that operate correctly, then new belt assemblies can stay in place. An inspection should be conducted on all seat belt assemblies that stay unused during a vehicle impact. Professional installers should replace damaged or malfunctioning assemblies. The correct method to handle the LH seat belt buckle assembly requires bolt removal before assembly installation and final tightening at 40 Nm (30 lb-ft). Take out the bolt from the center seat belt tongue assembly before installation while tightening it to 40 Nm (30 lb-ft). Tighten the bolt from the RH seat belt buckle assembly to 40 Nm (30 lb-ft) when correctly installing it into its position. Before installing, the seat belt webbing needs to be untwisted, so the installation process must go in reverse order of removal steps. Active restraint system operation requires a final check before completing installation.