OEM 2007 Ford E-250 Washer Reservoir

2007 Ford E-250 Washer Reservoir Parts Questions & Experts Answers

• Q: How to service and repair the windshield washer reservoir on 2007 Ford E-250?

  A: The windshield washer reservoir maintenance procedure starts with hood support while removing the battery together with the battery tray using four bolts that need 28 Nm (21 lb-ft) torque for reinstallation. When operating on the windshield washer hose it is essential to gather the washer fluid into a holding container. The washer pump and reservoir removal requires first loosening and then tightening the nut to 4 Nm (35 lb-in) before proceeding with the bolt removal and tightening to 4 Nm (35 lb-in) during reinstallation. The windshield washer pump removal begins by removing the electrical connector then detaching the wiring harness locator from the washer pump and reservoir followed by disconnecting the filler hose and windshield washer hose until you can remove the washer pump and reservoir. The washer pump removal from the reservoir completes the process and its installation requires following the reverse order of removal steps.