How to service and repair the windshield washer pump and reservoir on 2007 Ford E-250?

The windshield washer pump and reservoir service requires you to first raise the hood while supporting it then unfasten the four bolts securing the battery and tray so that you can reinstall them at 28 Nm (21 lb-ft). After removing the windshield washer hose one should collect the washer fluid into a receptacle. The washer pump removal should begin with the separation of the nut and bolt that require a torque of 4 Nm (35 lb-in) for proper installation. You should start by disconnecting the filler hose along with the electrical connector before separating the wiring harness locator from the washer pump and reservoir and ending with the windshield washer hose detachment to successfully remove the washer pump and reservoir. The removal of the washer pump from the reservoir should be followed by an inverse installation of the original removal steps.

OEM 2007 Ford E-250 Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Pumps found

View related parts
2007 Ford E-250 Water Pump, Front
Part Number: E5TZ-17664-B
$20.51 MSRP: $33.09
You Save: $12.58 (39%)
ADD TO CART
Product Specifications
- Other Name: Motor And Pump Assembly; Windshield Washer Pump, Front; Washer Pump Repair Kit; Washer Pump; Front Washer Pump; Rear Washer Pump; Pump; Windshield Washer Pump
- Position: Front
- Base No.: 17664
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E5TZ-17664-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Washer Pump
Part Number: 7R3Z-17664-A
$21.27 MSRP: $34.31
You Save: $13.04 (39%)
ADD TO CART
Product Specifications
- Other Name: Motor And Pump Assembly; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump
- Replaces: 6F1Z-17664-A
- Base No.: 17664
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-17664-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford E-250 Washer Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Washer Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Washer Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-250 Washer Pump Parts Questions & Experts Answers

Q: How to service and repair the windshield washer pump and reservoir on 2007 Ford E-250?
A: The windshield washer pump and reservoir service requires you to first raise the hood while supporting it then unfasten the four bolts securing the battery and tray so that you can reinstall them at 28 Nm (21 lb-ft). After removing the windshield washer hose one should collect the washer fluid into a receptacle. The washer pump removal should begin with the separation of the nut and bolt that require a torque of 4 Nm (35 lb-in) for proper installation. You should start by disconnecting the filler hose along with the electrical connector before separating the wiring harness locator from the washer pump and reservoir and ending with the windshield washer hose detachment to successfully remove the washer pump and reservoir. The removal of the washer pump from the reservoir should be followed by an inverse installation of the original removal steps.