How to service and repair the A/C Expansion Valve on 2007 Ford Edge?

To fix the TXV, drain refrigerant, drain the fitting nut, and discharge O-ring seals. Re-installation goes with a fitting of tightness to 8 Nm. Take off the TXV bolts, clear away seals and install new lubricated O-rings. Evacuate, leak test and charge up the system. Rechange receiver/drier desiccant only in case of contamination.

OEM 2007 Ford Edge A/C Expansion Valve

Air Conditioning Expansion Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Expansion Valve found

View related parts
2007 Ford Edge Expansion Valve Part Number: 7T4Z-19849-A
$32.75 MSRP: $52.00
You Save: $19.25 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Replaces: 7T4Z-19849-B
- Base No.: 19849
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.5 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-19849-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2007 Ford Edge A/C Expansion Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Edge A/C Expansion Valve Parts Q&A

Q: How to service and repair the A/C Expansion Valve on 2007 Ford Edge?
A: To fix the TXV, drain refrigerant, drain the fitting nut, and discharge O-ring seals. Re-installation goes with a fitting of tightness to 8 Nm. Take off the TXV bolts, clear away seals and install new lubricated O-rings. Evacuate, leak test and charge up the system. Rechange receiver/drier desiccant only in case of contamination.