FordParts
My Garage
My Account
Cart
OEM 2007 Ford Edge Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Battery Cable found
2007 Ford Edge Battery Cable Part Number: 7T4Z-14300-AB
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Manufacturer Note: Complete Asy., Includes Positive & Negative Battery Cables And A/C, Alternator & Starter Motor Cables
- Replaces: 7T4Z-14300-AA
- Base No.: 14300
- Item Weight: 4.00 Pounds
- Item Dimensions: 17.6 x 4.4 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-14300-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Edge Battery Cable Parts Q&A
- Q: How to service the battery cables on 2007 Ford Edge?A: Service of battery cables begins with removing the battery tray before continuing with the next steps. After removing the bolt from the ground terminal need to preserve this component while fastening it at 10Nm (89 lb-in) before reinstalling it. After releasing the nut you should place the BJB cable terminal to the side before tightening it to 8 Nm (71 lb-in) during the installation process. The starter solenoid terminal service begins by removing the cover then the nut to put the terminal aside before securing it to 12 Nm (9 lb-ft). The battery cable starter motor terminal nut requires removal after which you should place it aside when reinstalling the nut at a torque of 12 Nm (9 lb-ft). The reinstallation requires tightening the bolt to 10 Nm (89 lb-in) during its placement of the battery cable engine ground terminal aside. First release the battery cable from the top of the intake manifold then free up the three battery cable locators from the LH valve cover. First step involves placing the generator protective cover to the side before removing the nut which leads to setting the generator B+ terminal aside. Tighten this and the generator B+ terminal to 12 Nm (9 lb-ft) when reinstalling it. The battery cables need to be removed completely before reinstalling the component using the reverse order of removal.