My Garage
Cart

OEM 2007 Ford Edge Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

  • 2007 Ford Edge Parking Brake Cable - 7T4Z-2A603-A
    2007 Ford Edge Parking Brake Cable Diagram - 7T4Z-2A603-A
    View related parts

    2007 Ford Edge Rear Cable, Passenger Side Part Number: 7T4Z-2A603-A

    $28.11 MSRP: $38.26
    You Save: $10.15 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Passenger Side
    • Base No.: 2A635
    • Item Weight: 1.50 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7T4Z-2A603-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
  • 2007 Ford Edge Parking Brake Cable - 7T4Z-2A635-A
    2007 Ford Edge Parking Brake Cable Diagram - 7T4Z-2A635-A
    View related parts
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Driver Side
    • Base No.: 2A635
    • Item Weight: 1.60 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7T4Z-2A635-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
  • 2007 Ford Edge Parking Brake Cable - 8T4Z-2853-A
    2007 Ford Edge Parking Brake Cable Diagram - 8T4Z-2853-A
    View related parts
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Replaces: 7T4Z-2853-B
    • Base No.: 2853
    • Item Weight: 2.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8T4Z-2853-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

2007 Ford Edge Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Edge Parking Brake Cable Parts Q&A

  • Q: How to service and repair the rear left parking brake cable on 2007 Ford Edge?
    A: Start the service process for the rear left parking brake cable by hoisting the vehicle with neutral transmission. You can release tension from the parking brake cable by loosening the adjustment nut on the equalizer before disconnection starts with the left-hand cable at the equalizer point. The tabs need pressing to release the cable from its bracket connection. During the procedure for all-wheel drive vehicles extract the wheel speed sensor bolt and save the sensor until you reinstall it with 7 Nm (62 inch lbs) torque. The procedure requires disconnecting the parking brake cable from lever after removing the two support plate bolts which should be torqued to 23 Nm (17 ft. lbs) during installation. The stabilizer bar link requires you to remove its nut initially but set the link aside before tightening the new nut to 35 Nm (26 ft. lbs). Tighten the bolts that secure front bracket and middle bracket and parking brake cable to 23 Nm before reinstallation. Conclude by undoing the removal steps and perform necessary adjustments to the parking brake cable.

Related 2007 Ford Edge Parts