How to service and repair the rear brake caliper on 2007 Ford Escape?

Service and repair operations on the rear brake caliper must start with parking the vehicle at neutral position on raised elevation. Only DOT 3 approved motor vehicle brake fluid should be used because other fluids result in permanent brake damage and brake failure leading to personal injury. Urgent water washing of brake fluid spills will protect both painted and plastic components. Follow the procedures below to getService the rear brake caliper jounce hose flow bolt by discarding the two copper washers then adding new copper washers before tightening the bolt to 35 Nm (26 ft. lbs.). The next step involves taking out the two brake caliper guide bolts before you tighten them to 35 Nm (26 ft. lbs.) upon replacing them. The brake caliper installation must follow the removal steps in reverse order and the brake system should be bled before completion. To access emergency medical information about brake fluid contact Ford/Motorcraft products through the USA or Canada toll-free number 1-800-959-3673 and use the available product Material Safety Data Sheet (MSDS).

OEM 2007 Ford Escape Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Calipers found

View related parts
2007 Ford Escape Caliper, Rear Passenger Side Part Number: 6L8Z-2553-A
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5L8Z-2553-AB
- Base No.: 2552
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.3 x 6.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L8Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Caliper, Rear Driver Side Part Number: 6L8Z-2552-A
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Driver Side
- Replaces: 5L8Z-2552-AB
- Base No.: 2552
- Item Weight: 5.60 Pounds
- Item Dimensions: 8.2 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L8Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Caliper, Front Driver Side Part Number: 7L8Z-2B121-B
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Driver Side
- Replaces: 5L8Z-2B121-AA
- Base No.: 2B120
- Item Weight: 11.00 Pounds
- Item Dimensions: 8.8 x 5.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-2B121-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Caliper, Front Passenger Side Part Number: 7L8Z-2B120-B
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Replaces: 5L8Z-2221-AA, 5L8Z-2B120-AB, 5L8Z-2221-A
- Base No.: 2B120
- Item Weight: 11.70 Pounds
- Item Dimensions: 8.8 x 5.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-2B120-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Escape Overhaul Kit Part Number: 5L8Z-2221-A
Product Specifications
- Other Name: Kit - Wheel Brake Cylinder; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Kit - Wheel Brake Cylinder Repair
- Manufacturer Note: Boot And Seal
- Replaced by: 7L8Z-2B120-B
- Base No.: 2221A
- Item Weight: 10.90 Pounds
- Item Dimensions: 8.8 x 5.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-2221-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Ford Escape Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Escape Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Escape Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Escape Brake Caliper Parts Q&A

Q: How to service and repair the rear brake caliper on 2007 Ford Escape?
A: Service and repair operations on the rear brake caliper must start with parking the vehicle at neutral position on raised elevation. Only DOT 3 approved motor vehicle brake fluid should be used because other fluids result in permanent brake damage and brake failure leading to personal injury. Urgent water washing of brake fluid spills will protect both painted and plastic components. Follow the procedures below to getService the rear brake caliper jounce hose flow bolt by discarding the two copper washers then adding new copper washers before tightening the bolt to 35 Nm (26 ft. lbs.). The next step involves taking out the two brake caliper guide bolts before you tighten them to 35 Nm (26 ft. lbs.) upon replacing them. The brake caliper installation must follow the removal steps in reverse order and the brake system should be bled before completion. To access emergency medical information about brake fluid contact Ford/Motorcraft products through the USA or Canada toll-free number 1-800-959-3673 and use the available product Material Safety Data Sheet (MSDS).