FordParts
My Garage
My Account
Cart
OEM 2007 Ford Escape Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Starters found
2007 Ford Escape Starter Part Number: 9E5Z-11002-A
$289.82 MSRP: $480.00You Save: $190.18 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: BE5Z-11002-B, SA-1019
- Base No.: 11002
- Item Weight: 9.20 Pounds
- Item Dimensions: 8.0 x 6.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Escape Starter Part Number: BB5Z-11002-A
Product Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: 6S4Z-11002-AA, 5S4Z-11002-A, SA-934
- Base No.: 11002
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.4 x 5.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BB5Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Escape Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Escape Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Escape Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Escape Starter Parts Q&A
- Q: How to service and repair the starter motor on 2007 Ford Escape?A: The procedure to maintain starter motors starts with placing the vehicle in neutral gear while hoisting it in the air. Follow this procedure to disconnect the battery cable ground connection while also unfastening the starter solenoid nut before tightening it to 5 Nm (44 lb-in). During installation the starter solenoid terminal cover and cables need to be tightened to 12 Nm (9 lb-ft). Separate the wiring harness retainer from its position then lay the wiring harness to the side. The ground stator nut gets removed before setting aside the strap while maintaining a torque of 25 Nm (18 lb-ft) when replacement happens. Begin by taking off the two starter motor studs but tighten the upper and lower starter motor studs first with your fingers before securing the upper bolt at 35 Nm (26 lb-ft) and the lower bolt at 35 Nm (26 lb-ft). Complete the installation by executing the reverse steps of the removal procedure.