How to service and repair the front antenna cable on 2007 Ford Expedition?

The service process for front antenna lead-in cable consists of sequential steps that start with removing the audio unit then moving to right-hand scuff plate removal followed by right-hand A-pillar lower trim panel removal. The technician disconnects the rear antenna lead-in cable from its attached connection to the front antenna lead-in cable. The antenna functions as part of the wiring harness so replacement is impossible so cut the old antenna cables and tape the remaining parts to the wiring harness to stop receiving unwanted sounds. The third step involves taking away the ground plate together with the antenna cable endings. The wiring harness should be taped or wire-tied to reduce unnecessary noise during new cable installation. The removal process should be followed in reverse to accomplish the installation.

OEM 2007 Ford Expedition Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2007 Ford Expedition Antenna Cable
Part Number: AL1Z-18812-C
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Replaces: 7L1Z-18812-C
- Base No.: 18812A
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18812-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Antenna Cable
Part Number: AL1Z-18812-B
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Replaces: 7L1Z-18812-B
- Base No.: 18812B
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18812-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Antenna Cable
Part Number: AL1Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Replaces: 7L1Z-18812-A
- Base No.: 18812A
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2007 Ford Expedition Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Expedition Antenna Cable Parts Questions & Experts Answers

Q: How to service and repair the front antenna cable on 2007 Ford Expedition?
A: The service process for front antenna lead-in cable consists of sequential steps that start with removing the audio unit then moving to right-hand scuff plate removal followed by right-hand A-pillar lower trim panel removal. The technician disconnects the rear antenna lead-in cable from its attached connection to the front antenna lead-in cable. The antenna functions as part of the wiring harness so replacement is impossible so cut the old antenna cables and tape the remaining parts to the wiring harness to stop receiving unwanted sounds. The third step involves taking away the ground plate together with the antenna cable endings. The wiring harness should be taped or wire-tied to reduce unnecessary noise during new cable installation. The removal process should be followed in reverse to accomplish the installation.