FordParts
My Garage
My Account
Cart
OEM 2007 Ford Expedition Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2007 Ford Expedition Stabilizer Link, Front Part Number: 7L1Z-5K483-B
$50.50 MSRP: $83.09You Save: $32.59 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 1.50 Pounds
- Item Dimensions: 10.1 x 3.0 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L1Z-5K483-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Expedition Stabilizer Link, Rear Part Number: 7L1Z-5K484-AB
$31.03 MSRP: $49.27You Save: $18.24 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Base No.: 5K484
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.1 x 19.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L1Z-5K484-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Expedition Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Expedition Sway Bar Link Parts Q&A
- Q: How to service and repair the front sway bar link on 2007 Ford Expedition?A: Service and repair operations of the front sway bar and link need to start by elevating the vehicle onto a hoist when it is in neutral gear. The hex holding feature prevents the stud from turning during removal of two upper sway bar link nuts which should be tightened to 80 Nm (59 lb-ft) during installation. The process continues by removing the two lower sway bar link nuts but discarding them while taking out the sway bar links without tools and tightening them to 80 Nm (59 lb-ft) when reinstalling. The installer can begin by deleting the four sway bar bracket nuts and both brackets and sway bar. All nuts must be discarded before reinstallation where new nuts should be tightened to 55 Nm (41 lb-ft). This repair process requires discarding sway bar bracket bolt plates together with proper installation of the sway bar bushing upset into groove position. Bushings for the sway bar need replacement inspection then installation when necessary. The final step in installation requires performing the backward procedure of removal.