How to Service the Rear Motor and Transmission Mount for Wheel Drive on 2007 Ford Explorer?

The first step to work on the transmission mount of rear wheel drive vehicles involves placing the vehicle in neutral mode on a hoist. A transmission jack should support the transmission while you remove its insulator nuts followed by the two insulator bolts. After removing the nuts proceed to elevate the transmission to remove the transmission support insulator. Place the new transmission support insulator and lower the transmission onto it for the installation process. Secure the transmission support insulator bolts at 90 Nm (66 ft. lbs.) torque setting then add the transmission support insulator nuts at the same torque specification of 90 Nm (66 ft. lbs.).

OEM 2007 Ford Explorer Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Motor And Transmission Mounts found

View related parts
2007 Ford Explorer Motor Mount Bracket, Driver Side Part Number: 7A2Z-6031-AA
$17.30 MSRP: $23.54
You Save: $6.24 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6031
- Item Weight: 3.50 Pounds
- Item Dimensions: 5.9 x 4.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6031-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Motor Mount, Passenger Side Part Number: 7A2Z-6038-D
$70.30 MSRP: $102.33
You Save: $32.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Passenger Side
- Replaces: 5L2Z-6038-AD, 7A2Z-6038-B, 5L2Z-6038-BB, 5L2Z-6038-AB, 6L2Z-6038-AB, 5L2Z-6038-BD
- Base No.: 6038A
- Item Weight: 4.60 Pounds
- Item Dimensions: 7.0 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6038-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Motor Mount, Driver Side Part Number: 7A2Z-6038-CA
$59.68 MSRP: $91.67
You Save: $31.99 (35%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: 7A2Z-6038-C, 7A2Z-6038-A
- Base No.: 6038B
- Item Weight: 4.70 Pounds
- Item Dimensions: 7.1 x 5.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Motor Mount, Driver Side Part Number: 6L2Z-6031-BA
$28.44 MSRP: $39.34
You Save: $10.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Left; Motor Mount Bracket; Front Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: 7A2Z-6031-BB
- Base No.: 6031
- Item Weight: 3.70 Pounds
- Item Dimensions: 8.0 x 7.9 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6031-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLT, XLT Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Transmission Mount Part Number: 8L2Z-6068-C
$11.36 MSRP: $15.72
You Save: $4.36 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Replaces: 6L2Z-6068-BA
- Base No.: 6068A
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Motor Mount Bracket, Passenger Side Part Number: 5L2Z-6030-BA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 7A2Z-6030-BA
- Base No.: 6030
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.4 x 4.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6030-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Explorer Transmission Mount Part Number: 8L2Z-6068-B
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Transmission Mounts; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Replaces: 6L2Z-6068-AA
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Trans Crossmember Part Number: 6L2Z-6A023-AB
Product Specifications
- Other Name: Support; Transmission Crossmember; Transfer Case Mount; Transmission Mount; Motor Mount; Rear Support
- Base No.: 6A023
- Item Weight: 22.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6A023-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Motor Mount Bracket, Passenger Side Part Number: 6L2Z-6030-AA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6030-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
2007 Ford Explorer Transmission Mount Part Number: 8L2Z-6068-A
$33.37 MSRP: $47.33
You Save: $13.96 (30%)
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 7A2Z-6068-A
- Base No.: 6068
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2007 Ford Explorer Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Explorer Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Explorer Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Explorer Motor And Transmission Mount Parts Q&A

Q: How to Service the Rear Motor and Transmission Mount for Wheel Drive on 2007 Ford Explorer?
A: The first step to work on the transmission mount of rear wheel drive vehicles involves placing the vehicle in neutral mode on a hoist. A transmission jack should support the transmission while you remove its insulator nuts followed by the two insulator bolts. After removing the nuts proceed to elevate the transmission to remove the transmission support insulator. Place the new transmission support insulator and lower the transmission onto it for the installation process. Secure the transmission support insulator bolts at 90 Nm (66 ft. lbs.) torque setting then add the transmission support insulator nuts at the same torque specification of 90 Nm (66 ft. lbs.).