Other Name: Bracket - Transmission Extension Housing; Automatic Transmission Mount; Engine Mount Torque Strut; Motor Mount.; Upper Bracket; Upper Trans Mount
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2023 Ford Explorer | Base, Limited, Limited Hybrid, Platinum Hybrid, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
Position: Driver Side
Replaces: 7A2Z-6038-C, 7A2Z-6038-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
| Page 1 of 4 |Next >
1-20 of 68 Results
Ford Explorer Motor And Transmission Mount
Welcome to our website where you can discover high-quality, genuine Ford Explorer Motor And Transmission Mount. We offer an extensive inventory of OEM Ford Explorer Motor And Transmission Mount at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Explorer Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to Service the Rear Motor and Transmission Mount for Wheel Drive on Ford Explorer?
A: The first step to work on the transmission mount of rear wheel drive vehicles involves placing the vehicle in NEUTRAL mode on a hoist. A transmission jack should support the transmission while you remove its insulator nuts followed by the two insulator bolts. After removing the nuts proceed to elevate the transmission to remove the transmission support insulator. Place the new transmission support insulator and lower the transmission onto it for the installation process. Secure the transmission support insulator bolts at 90 Nm (66 ft. lbs.) torque setting then add the transmission support insulator nuts at the same torque specification of 90 Nm (66 ft. lbs.).