FordParts
My Garage
My Account
Cart
OEM 2007 Ford Explorer Sport Trac Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Starters found
2007 Ford Explorer Sport Trac Starter Part Number: 6L2Z-11V002-CRM
$143.34 MSRP: $230.91You Save: $87.57 (38%)Product Specifications- Other Name: Remanufactured Starter Motor Assembly; Starter Motor; Starter Motor Assembly
- Replaces: 5L2Z-11002-AA, SA-962, 6L2Z-11002-C, SA-945
- Base No.: 11002
- Item Weight: 9.70 Pounds
- Item Dimensions: 6.3 x 8.4 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-11V002-CRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Explorer Sport Trac Starter Part Number: 6L2Z-11002-BA
Product Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor; Starter Motor Reman; Starters
- Base No.: 11002
- Item Weight: 9.60 Pounds
- Item Dimensions: 6.2 x 7.7 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-11002-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Explorer Sport Trac Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Explorer Sport Trac Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Explorer Sport Trac Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Explorer Sport Trac Starter Parts Q&A
- Q: How to service and repair the starter motor on 2007 Ford Explorer Sport Trac?A: Start the process of servicing or repairing the starter motor when the vehicle remains in neutral position on a hoist. Start with disconnecting the battery ground wire then removing the starter solenoid terminal cover. Time to disconnect the B-terminal nut while extracting the cable after securing it at 12 Nm (9 lb-ft) torque when reinstalling. After removal of the S-terminal nut disconnect the cable while tightening it to 6 Nm (53 lb-in) torque. Next dismantle the nut before putting the ground cable to the side. After unbolted parts, remover the stud bolt and starter machine before reinstallation with 25 Nm (18 lb-ft). The steps for installation involve following removal procedures in reverse order while first tightening the upper bolt and subsequently the lower fastener. The maintenance period ends with securing protective caps to avoid personal harm from heavy gauge leads that directly connect to the battery.