FordParts
My Garage
My Account
Cart
OEM 2008 Ford Explorer Sport Trac Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Starters found
2008 Ford Explorer Sport Trac Starter Part Number: 6L2Z-11V002-CRM
$143.34 MSRP: $230.91You Save: $87.57 (38%)Product Specifications- Other Name: Remanufactured Starter Motor Assembly; Starter Motor; Starter Motor Assembly
- Replaces: 5L2Z-11002-AA, SA-962, 6L2Z-11002-C, SA-945
- Base No.: 11002
- Item Weight: 9.70 Pounds
- Item Dimensions: 6.3 x 8.4 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-11V002-CRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Explorer Sport Trac Starter Part Number: 6L2Z-11002-BA
Product Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor; Starter Motor Reman; Starters
- Base No.: 11002
- Item Weight: 9.60 Pounds
- Item Dimensions: 6.2 x 7.7 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-11002-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Explorer Sport Trac Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Sport Trac Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Sport Trac Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Explorer Sport Trac Starter Parts Q&A
- Q: How to service and repair the starter motor on 2008 Ford Explorer Sport Trac?A: Begin starter motor servicing and repairs when the vehicle remains in neutral position on top of a hoist. Frequent the battery ground cable before proceeding to disconnect it for electric safety purposes. First remove the starter motor solenoid terminal cover before taking out the B terminal nut to disconnect its cable while torquing it to 12 Nm (9 lb-ft) upon installation. Begin by taking off the S terminal nut from the cable then disconnecting it so you apply torque of 6 Nm (53 lb-in) when installing it. Following this step the ground cable securing nut must be removed before the cable is placed aside. The bolt and stud bolt together with the starter motor must be taken apart for installation by following the torque specifications of 25 Nm (18 lb-ft). People should follow the opposite installation procedure to remove the hardware and should begin tightening the upper bolt earlier during reinstallation than the lower fastener.