FordParts
My Garage
My Account
Cart
OEM 2007 Ford F-150 Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Pads found
2007 Ford F-150 Brake Pads, Front Part Number: 4U2Z-2V001-CA
$45.07 MSRP: $66.65You Save: $21.58 (33%)Product Specifications- Other Name: Pad; Disc Brake Pad Set, Front; Front Pads; Disc Brake Pad Set
- Manufacturer Note: Ford Retail Spec
- Position: Front
- Replaces: 4L3Z-2001-AD, 6L3Z-2001-A, BRF-1395, 5L3Z-2001-A, BRF-1392, BRF-1083, 9L3Z-2001-A
- Base No.: 2001
- Item Weight: 8.10 Pounds
- Item Dimensions: 10.4 x 8.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V001-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-150 Brake Pads, Rear Part Number: AU2Z-2V200-A
$46.59 MSRP: $66.65You Save: $20.06 (31%)Product Specifications- Other Name: Pad - Brake; Disc Brake Pad Set, Rear; Rear Pads
- Position: Rear
- Replaces: 4U2Z-2V200-A, 6L3Z-2200-AB, AL3Z-2200-A, BRF-1012-B, BRF-1012-A, BL3Z-2200-B, BRF-1425, 6L3Z-2200-CD, BR-1012-C, BR-1012-B, BRF-1012-C, AL3Z-2V200-A, 8L3Z-2200-A, BL3Z-2200-C
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.8 x 5.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-2V200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-150 Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-150 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-150 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford F-150 Brake Pads Parts Q&A
- Q: How to service and repair the front brake pads on 2007 Ford F-150?A: The front brake pad repair process requires using DOT 3 motor vehicle brake fluid since other fluids will permanently damage brake components making the vehicle unable to brake leading to personal injury. Prepare by checking both the product label warnings and reach out to 1-800-959-3673 when requiring emergency Ford/Motorcraft product information. Chances of fluid contamination on painted or plastic materials require instant water rinsing to prevent damage. Examine the brake fluid level inside the brake master cylinder reservoir then drain some fluid if needed to reach half full. The vehicle needs to be placed on a hoist while in neutral gear position. The brake hose must not support the caliper to protect it from damage. Support the caliper using mechanic's wire after you remove its two brake caliper guide pin bolts. To replace the brake pads you must first eliminate the spring clips as well as remove both pads and then install fresh brake pads only when the existing pads breach the established restrictions regarding metal backing plate clearance. All pad installation should be grouped in complete axle pairings. Check the brake pads to determine their conditions through examination and testing. Each brake disc pad set from the manufacturer supplies the required pads for both right-hand and left-hand side brake caliper assembly. Use the right tool to push the piston into the bracket bore while protecting boots and pistons before placing both new brake pads together with new spring clips. Position the brake caliper on the brake caliper anchor plate beginning with the lower caliper guide pin bolt followed by installation and tightening procedure of the two guide pin bolts to 74 Nm (55 ft. lbs.).