How to service and repair the front brake caliper on 2007 Ford F-250 Super Duty?

The procedure for front brake caliper service and repair begins with proper parking of the vehicle on a hoist while placed in neutral gear. Start by removing the brake caliper flow bolt and placing the brake flexible hose to the side with disposal of its two copper washers. This maneuver should be avoided because it can ruin caliper pistons along with their boots. The brake caliper service starts with removing two bolts before removing the brake caliper. The disc brake caliper needs replacement whenever leaks or damaged boots appear during inspection. The installation process requires the bottom caliper bolt to be tightened first while making sure the caliper pin boots are properly in position to protect the guide pins from damage. First install the brake caliper then attach its two bolts while applying torque of 76 Nm (56 ft. lbs.) to F-250 and F-350 series vehicles or 63 Nm (46 ft. lbs.) for F-450 and F-550 models. Set the brake caliper flow bolt in place before tightening it to 48 Nm (35 ft. lbs.) by using two new copper washers which reattach the brake flexible hose. Conclude by bleeding the caliper then verify the brake system function properly. You must employ brake fluid approved for DOT 3 motor vehicles to maintain brake components health while you should wipe off promptly any brake fluid which spills onto painted or plastic components. Emergency medical information about brake fluid can be obtained by calling Ford/Motorcraft at 1-800-959-3673 in the USA or Canada and referring to the product Material Safety Data Sheet if it exists.

OEM 2007 Ford F-250 Super Duty Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2007 Ford F-250 Super Duty Caliper, Front Driver Side Part Number: AC3Z-2B121-A
$99.32 MSRP: $158.55
You Save: $59.23 (38%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Replaces: BRCF-158, 5C3Z-2B121-AA, 8C3Z-2B121-A
- Base No.: 2B120
- Item Weight: 17.90 Pounds
- Item Dimensions: 13.5 x 5.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC3Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2007 Ford F-250 Super Duty Caliper, Rear Passenger Side Part Number: BC3Z-2552-A
$83.79 MSRP: $138.91
You Save: $55.12 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaces: 5C3Z-2552-B, BRCF-116
- Base No.: 2552
- Item Weight: 13.80 Pounds
- Item Dimensions: 10.2 x 5.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2007 Ford F-250 Super Duty Caliper, Rear Driver Side Part Number: BC3Z-2553-A
$88.90 MSRP: $144.55
You Save: $55.65 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Replaces: 5C3Z-2553-B, BRCF-118
- Base No.: 2552
- Item Weight: 14.20 Pounds
- Item Dimensions: 10.1 x 5.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2007 Ford F-250 Super Duty Caliper, Rear Part Number: 5C3Z-2553-D
$87.68 MSRP: $142.55
You Save: $54.87 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear
- Replaces: 5C3Z-2553-A, BRCF-117, 5C3Z-2552-AA
- Base No.: 2553
- Item Weight: 19.70 Pounds
- Item Dimensions: 9.8 x 5.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-2553-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-250 Super Duty Caliper, Rear Part Number: 5C3Z-2552-C
$91.99 MSRP: $149.64
You Save: $57.65 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear
- Replaces: 5C3Z-2552-A, 5C3Z-2553-AA, BRCF-115
- Base No.: 2552
- Item Weight: 16.20 Pounds
- Item Dimensions: 10.3 x 5.2 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-2552-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-250 Super Duty Caliper, Front Passenger Side Part Number: AC3Z-2B120-A
$104.73 MSRP: $167.27
You Save: $62.54 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Passenger Side
- Replaces: 8C3Z-2B120-A, BRCF-156, 5C3Z-2B120-AA
- Base No.: 2B120
- Item Weight: 18.70 Pounds
- Item Dimensions: 14.8 x 14.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC3Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL

2007 Ford F-250 Super Duty Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-250 Super Duty Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-250 Super Duty Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-250 Super Duty Brake Caliper Parts Q&A

Q: How to service and repair the front brake caliper on 2007 Ford F-250 Super Duty?
A: The procedure for front brake caliper service and repair begins with proper parking of the vehicle on a hoist while placed in neutral gear. Start by removing the brake caliper flow bolt and placing the brake flexible hose to the side with disposal of its two copper washers. This maneuver should be avoided because it can ruin caliper pistons along with their boots. The brake caliper service starts with removing two bolts before removing the brake caliper. The disc brake caliper needs replacement whenever leaks or damaged boots appear during inspection. The installation process requires the bottom caliper bolt to be tightened first while making sure the caliper pin boots are properly in position to protect the guide pins from damage. First install the brake caliper then attach its two bolts while applying torque of 76 Nm (56 ft. lbs.) to F-250 and F-350 series vehicles or 63 Nm (46 ft. lbs.) for F-450 and F-550 models. Set the brake caliper flow bolt in place before tightening it to 48 Nm (35 ft. lbs.) by using two new copper washers which reattach the brake flexible hose. Conclude by bleeding the caliper then verify the brake system function properly. You must employ brake fluid approved for DOT 3 motor vehicles to maintain brake components health while you should wipe off promptly any brake fluid which spills onto painted or plastic components. Emergency medical information about brake fluid can be obtained by calling Ford/Motorcraft at 1-800-959-3673 in the USA or Canada and referring to the product Material Safety Data Sheet if it exists.