How to service and repair the front brake caliper on 2008 Ford F-250 Super Duty?

You must start service and repair of front brake calipers by removing the wheel with its attached tire. The first step is to remove the brake caliper flow bolt followed by setting the brake flexible hose to the side keeping the two copper washers for disposal. Take out the brake caliper using two bolts which secure it to the rest of the assembly. Placement of the brake caliper starts with proper seating of caliper pin boots which protects guide pins and moves to installing two brake caliper bolts where the bottom bolt must receive torque before the top bolt to prevent damage. When installing the brake caliper flow bolt on F-250 and F-350 models tighten its bolts to 76 Nm (56 lb-ft) but the F-450 and F-550 models need 63 Nm (46 lb-ft). You should install the brake flexible hose to the brake caliper using two new copper washers before tightening the flow bolt to 48 Nm (35 lb-ft). The brake system requires bleeding of the caliper following installation and wheel reinstallation then a test of normal brake function must be performed. The brake system demands fluid that exceeds manufacturer standards for cleanliness and you should never reusedisposed brake fluid to prevent contamination risks. The substance in brake fluid poses harm to painted items and plastic surfaces so clean up spills promptly using water. Contact 1-800-959-3673 to receive emergency medical information about Ford/Motorcraft goods while referring to available Material Safety Data Sheets.

OEM 2008 Ford F-250 Super Duty Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2008 Ford F-250 Super Duty Caliper, Front Driver Side Part Number: AC3Z-2B121-A
$94.48 MSRP: $150.73
You Save: $56.25 (38%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Replaces: BRCF-158, 5C3Z-2B121-AA, 8C3Z-2B121-A
- Base No.: 2B120
- Item Weight: 17.90 Pounds
- Item Dimensions: 13.5 x 5.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC3Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Caliper, Rear Passenger Side Part Number: BC3Z-2552-A
$83.79 MSRP: $138.91
You Save: $55.12 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaces: 5C3Z-2552-B, BRCF-116
- Base No.: 2552
- Item Weight: 13.80 Pounds
- Item Dimensions: 10.2 x 5.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Caliper, Rear Driver Side Part Number: BC3Z-2553-A
$90.83 MSRP: $150.73
You Save: $59.90 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Replaces: 5C3Z-2553-B, BRCF-118
- Base No.: 2552
- Item Weight: 14.20 Pounds
- Item Dimensions: 10.1 x 5.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Caliper, Rear Driver Side Part Number: AC3Z-2553-A
$99.95 MSRP: $162.73
You Save: $62.78 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Replaces: 8C3Z-2553-A, BRCF-155
- Base No.: 2552
- Item Weight: 11.70 Pounds
- Item Dimensions: 11.5 x 5.5 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC3Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Caliper, Front Passenger Side Part Number: AC3Z-2B120-A
$91.77 MSRP: $149.27
You Save: $57.50 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Passenger Side
- Replaces: 8C3Z-2B120-A, BRCF-156, 5C3Z-2B120-AA
- Base No.: 2B120
- Item Weight: 18.70 Pounds
- Item Dimensions: 14.8 x 14.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC3Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Caliper, Rear Passenger Side Part Number: AC3Z-2552-A
$89.42 MSRP: $148.36
You Save: $58.94 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaces: BRCF-72, 8C3Z-2552-A, 8C3Z-2552-AA
- Base No.: 2552
- Item Weight: 11.80 Pounds
- Item Dimensions: 11.4 x 5.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC3Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL

2008 Ford F-250 Super Duty Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Brake Caliper Parts Q&A

Q: How to service and repair the front brake caliper on 2008 Ford F-250 Super Duty?
A: You must start service and repair of front brake calipers by removing the wheel with its attached tire. The first step is to remove the brake caliper flow bolt followed by setting the brake flexible hose to the side keeping the two copper washers for disposal. Take out the brake caliper using two bolts which secure it to the rest of the assembly. Placement of the brake caliper starts with proper seating of caliper pin boots which protects guide pins and moves to installing two brake caliper bolts where the bottom bolt must receive torque before the top bolt to prevent damage. When installing the brake caliper flow bolt on F-250 and F-350 models tighten its bolts to 76 Nm (56 lb-ft) but the F-450 and F-550 models need 63 Nm (46 lb-ft). You should install the brake flexible hose to the brake caliper using two new copper washers before tightening the flow bolt to 48 Nm (35 lb-ft). The brake system requires bleeding of the caliper following installation and wheel reinstallation then a test of normal brake function must be performed. The brake system demands fluid that exceeds manufacturer standards for cleanliness and you should never reusedisposed brake fluid to prevent contamination risks. The substance in brake fluid poses harm to painted items and plastic surfaces so clean up spills promptly using water. Contact 1-800-959-3673 to receive emergency medical information about Ford/Motorcraft goods while referring to available Material Safety Data Sheets.