How to service and repair the axle beam on F-250 and F-350 on 2007 Ford F-350 Super Duty?

Start axle beam servicing for F-250 and F-350 models by taking out the wheel spindle connected to the radius arm. Gain authorization for the right-hand pivot bolt extraction by elevating the left-hand axle. Proceed by taking out the pivot nut together with the bolt and axle. The pivot bushing requires examination for signs of wear and damage so you should replace it with a new one if needed. Secure the axle pivot nut after installation by having the suspension at curb height. The front axle should be positioned inside the pivot bracket while you install the pivot bolt and nut until they become snug. Replace the radius arm before putting back the wheel spindle. The final step includes torquing the axle pivot nut to 300 Nm (222 ft. lbs.) while the vehicle occupies curb height position followed by checking and adjusting the front end alignment. Corrosion-resistant parts must be selected for suspension fasteners because inferior components including non-equivalent parts can produce substantial service deficits which necessitate using the same component number or an approved equivalent part number for replacement. You should always maintain specified torque values during reassembly because they ensure proper retention of these critical components.

OEM 2007 Ford F-350 Super Duty Axle Beam

Rigid Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Axle Beams found

View related parts
2007 Ford F-350 Super Duty Front Crossmember Part Number: 5C3Z-5C128-AA
$359.76 MSRP: $528.28
You Save: $168.52 (32%)
Product Specifications
- Other Name: Crossmember
- Base No.: 5035
- Item Weight: 35.70 Pounds
- Item Dimensions: 50.5 x 10.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5C128-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Rail End, Front Part Number: 5C3Z-5C145-BA
Product Specifications
- Other Name: Frame Assembly; Frame Side Member Assembly, Front
- Manufacturer Note: Service Only
- Position: Front
- Base No.: 5C145
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5C145-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Rail End, Front Part Number: 5C3Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Frame Side Member Assembly, Front
- Manufacturer Note: Service Only
- Position: Front
- Base No.: 5C145
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5C145-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-KB
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-KB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-JB
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-JB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-J
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-HB
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-HB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-H
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-GB
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-G
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-F
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty Frame Assembly Part Number: 5C3Z-5005-K
Product Specifications
- Other Name: Frame Rail
- Base No.: 5005
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5005-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

2007 Ford F-350 Super Duty Axle Beam

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-350 Super Duty Axle Beam available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-350 Super Duty Axle Beam as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-350 Super Duty Axle Beam Parts Q&A

Q: How to service and repair the axle beam on F-250 and F-350 on 2007 Ford F-350 Super Duty?
A: Start axle beam servicing for F-250 and F-350 models by taking out the wheel spindle connected to the radius arm. Gain authorization for the right-hand pivot bolt extraction by elevating the left-hand axle. Proceed by taking out the pivot nut together with the bolt and axle. The pivot bushing requires examination for signs of wear and damage so you should replace it with a new one if needed. Secure the axle pivot nut after installation by having the suspension at curb height. The front axle should be positioned inside the pivot bracket while you install the pivot bolt and nut until they become snug. Replace the radius arm before putting back the wheel spindle. The final step includes torquing the axle pivot nut to 300 Nm (222 ft. lbs.) while the vehicle occupies curb height position followed by checking and adjusting the front end alignment. Corrosion-resistant parts must be selected for suspension fasteners because inferior components including non-equivalent parts can produce substantial service deficits which necessitate using the same component number or an approved equivalent part number for replacement. You should always maintain specified torque values during reassembly because they ensure proper retention of these critical components.