OEM 2007 Ford Focus Antenna Cable

2007 Ford Focus Antenna Cable Parts Q&A

• Q: How to service the upper antenna cable on 2007 Ford Focus?

  A: Service the upper antenna cable by bearing in mind that the antenna lead-in cable should stay in the wiring harness but needs to be secured above the instrument panel harness with wire ties while the old cable ends require tying back or insulation to block noise. Start by taking off the base from the antenna followed by the trim panels on both A-pillars. The sequence for dismantling this part requires one to start with unscrewing the four screws and sun visors and finally detach the sun visor catch clips by opening their tabs and unscrewing the two screws. To remove the passenger assist handle covers start by using a suitable 6-mm flat-bladed screwdriver which should be turned counterclockwise for 90 degrees until the retaining clips release. Lower the front side of the headliner carefully to reach the antenna cable and then remove the antenna cable/base screw before disconnecting the upper cable from its clips. The installation finish will be achieved through reversing all steps from disassembly.