How to service the ignition coil-on-plug on 2007 Ford Focus?

The ignition coil-on-plug should be serviced by first un-connecting the electrical connector. After that, dismantle the bolt holding the ignition coil and disassemble the coil. Paradoxically, when fitting the new coil, be careful to tighten the bolt and undo the process of fitting. Also, put silicone dielectric material to the interior of the ignition coil boot before concluding installation.

OEM 2007 Ford Focus Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2007 Ford Focus Ignition Coil Part Number: 4M5Z-12029-B
$57.68 MSRP: $94.91
You Save: $37.23 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Replaces: 4M5Z-12029-BC, DG-507, 4M5Z-12029-A
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 4M5Z-12029-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, S, SE, SEL, SES, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2007 Ford Focus Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Focus Ignition Coil Parts Q&A

Q: How to service the ignition coil-on-plug on 2007 Ford Focus?
A: The ignition coil-on-plug should be serviced by first un-connecting the electrical connector. After that, dismantle the bolt holding the ignition coil and disassemble the coil. Paradoxically, when fitting the new coil, be careful to tighten the bolt and undo the process of fitting. Also, put silicone dielectric material to the interior of the ignition coil boot before concluding installation.