How to Service the Throttle Position Sensor on 2007 Ford Focus?

Service of the throttle position (TP) sensor requires users to disconnect both the battery ground cable then detach the TP sensor electrical connector. The two retaining screws securing the TP sensor need to be taken out first followed by sensor extraction. Proper installation of the sensor requires correct placement followed by screw tightening to 10 Nm (89 lb-in) until the removal steps are followed in reverse order.

OEM 2007 Ford Focus Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2007 Ford Focus Throttle Position Sensor
Part Number: YS4Z-9B989-BB
$35.72 MSRP: $57.64
You Save: $21.92 (39%)
ADD TO CART
Product Specifications
- Other Name: Potentiometer - Engine Throttle; Throttle Pos Sensor; Throttle Sensor
- Base No.: 9B989
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-9B989-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2007 Ford Focus Throttle Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Throttle Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Throttle Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Focus Throttle Position Sensor Parts Questions & Experts Answers

Q: How to Service the Throttle Position Sensor on 2007 Ford Focus?
A: Service of the throttle position (TP) sensor requires users to disconnect both the battery ground cable then detach the TP sensor electrical connector. The two retaining screws securing the TP sensor need to be taken out first followed by sensor extraction. Proper installation of the sensor requires correct placement followed by screw tightening to 10 Nm (89 lb-in) until the removal steps are followed in reverse order.