How to Service the Oil Pressure Switch on 2007 Ford Focus?

Begin your service of the Engine Oil Pressure (EOP) Switch at a hoist position using neutral transmission with a disconnected battery ground cable. The oil pressure switch requires both removal of its electrical connector and then the switch itself. Thread sealant with PTFE should be applied to the switch threads before tightening it to 15 Nm (11 ft. lbs.). Complete the installation by performing the reverse order of the removal procedure.

OEM 2007 Ford Focus Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2007 Ford Focus Pressure Switch, Green Part Number: BE8Z-9278-A
$2.27 MSRP: $3.60
You Save: $1.33 (37%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Oil Pressure Switch
- Replaces: 1S7Z-9278-AA, SW-6682
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BE8Z-9278-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, RS, S, SE, SEL, ST, Titanium, ZTS, ZTW, ZX3, ZX4 ST, ZX5 | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2007 Ford Focus Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Focus Oil Pressure Switch Parts Q&A

Q: How to Service the Oil Pressure Switch on 2007 Ford Focus?
A: Begin your service of the Engine Oil Pressure (EOP) Switch at a hoist position using neutral transmission with a disconnected battery ground cable. The oil pressure switch requires both removal of its electrical connector and then the switch itself. Thread sealant with PTFE should be applied to the switch threads before tightening it to 15 Nm (11 ft. lbs.). Complete the installation by performing the reverse order of the removal procedure.