FordParts
My Garage
My Account
Cart
OEM 2007 Ford Focus Ignition Lock Cylinder
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ignition Lock Cylinder found
2007 Ford Focus Ignition Lock Cylinder Part Number: 5S4Z-11582-BB
$97.43 MSRP: $163.56You Save: $66.13 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Lock Assembly - Steering And Ignition; Ignition Lock Assembly; Ignition Cylinder; Cylinder & Keys
- Replaces: XS4Z-11582-AC
- Base No.: 11582
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.1 x 2.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-11582-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Focus Ignition Lock Cylinder
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Ignition Lock Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Ignition Lock Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Focus Ignition Lock Cylinder Parts Q&A
- Q: How to Service and Repair the Ignition Lock Cylinder on 2007 Ford Focus?A: The first step to service the ignition switch lock cylinder requires disconnecting the battery. After disconnecting the battery start by removing the instrument panel lower panel screws and releasing the fastener before redoing all screws to 9Nm (80lb-in) torque when installing it back. A thin bladed screwdriver should be used to free the two tabs of the steering column shroud while the upper shroud needs to be taken off. First take out the audio control switch when present and follow with the removal of three lower steering column shroud screws. You should use a thin screwdriver to press the detent while turning the key to position I (Accessory). This will allow you to remove the lock cylinder. The installation process requires executing the reverse steps of the removal sequence.