How to service the Evaporative Emission Canister Purge Valve on 2007 Ford Freestar?

Starting the Evaporative Emission Canister Purge Valve service requires disconnecting the battery ground cable because it protects against fuel vapor fire or explosion risks. First disconnect the electrical connector from the EVAP canister purge valve and then remove the cowl panel grille. Detaching operation starts with removing the two quick connect couplings from the EVAP tube that connects with the EVAP canister purge valve. The two mounting nuts which connect the EVAP canister purge valve with its bracket need to be removed along with the bracket itself. The release tab should be depressed to remove the EVAP canister purge valve from its mounting bracket. Reinstall the components by following the given removal steps and securing the mounting nuts to a torque of 12 Nm (9 lb-ft). To complete the procedure run a leak test followed by performing a drive cycle to confirm proper operating condition.

OEM 2007 Ford Freestar Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
2007 Ford Freestar Vent Control Solenoid
Part Number: 6F9Z-9F945-AA
$81.05 MSRP: $117.98
You Save: $36.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Filter Solenoid; Solenoid; Vent
- Replaces: 5U5Z-9F945-CA
- Base No.: 9F945
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.8 x 3.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Purge Control Valve
Part Number: 4F1Z-9C915-AC
$86.68 MSRP: $142.62
You Save: $55.94 (40%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Vapor Canister Solenoid
- Replaces: 4F1Z-9C915-AA
- Base No.: 9C915
- Item Weight: 0.90 Pounds
- Item Dimensions: 5.8 x 3.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-9C915-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Purge Valve
Part Number: 4F2Z-9C915-AA
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve
- Base No.: 9C915
- Item Weight: 0.90 Pounds
- Item Dimensions: 5.5 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-9C915-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2007 Ford Freestar Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestar Canister Purge Valve Parts Questions & Experts Answers

Q: How to service the Evaporative Emission Canister Purge Valve on 2007 Ford Freestar?
A: Starting the Evaporative Emission Canister Purge Valve service requires disconnecting the battery ground cable because it protects against fuel vapor fire or explosion risks. First disconnect the electrical connector from the EVAP canister purge valve and then remove the cowl panel grille. Detaching operation starts with removing the two quick connect couplings from the EVAP tube that connects with the EVAP canister purge valve. The two mounting nuts which connect the EVAP canister purge valve with its bracket need to be removed along with the bracket itself. The release tab should be depressed to remove the EVAP canister purge valve from its mounting bracket. Reinstall the components by following the given removal steps and securing the mounting nuts to a torque of 12 Nm (9 lb-ft). To complete the procedure run a leak test followed by performing a drive cycle to confirm proper operating condition.