How to service the third row seat cover backrest on 2007 Ford Freestar?

Service work on the third row seat backrest cover starts with removing the third row seat and continuing with the removal of the third row backrest. The next step requires using the LH head restraint sleeve button to eliminate the three head restraints. The backrest J-clip requires release before removing two screws that detach the backrest pull-strap handle assembly. Detach the hardboard panel underneath the backrest trim cover but maintain care when separating the hook and loop fasteners because you may harm the hook and loop strip on the seat backrest foam pad. The work process requires a complete removal of three hog rings before folding the seat backrest trim cover. The inboard and outboard head restraint sleeves operate on different mechanisms so maintain their individuality because you will need to squeeze each sleeve tip while pulling its six sleeves from the frame tube. The process ends with utilizing reverse order to reinstall everything after removing the seat backrest trim cover.

OEM 2007 Ford Freestar Seat Cover

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Seat Covers found

View related parts
2007 Ford Freestar Seat Back Cover, Front Driver Side Part Number: 6F2Z-1764417-GC
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Base No.: <64416
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1764417-GC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Seat Back Cover, Front Passenger Side Part Number: 6F2Z-1764416-HC
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Base No.: <64416
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1764416-HC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Seat Back Cover, Front Passenger Side Part Number: 6F2Z-1764416-GC
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Base No.: <64416
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1764416-GC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Seat Cover, Front Part Number: 6F2Z-1762900-DA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front
- Position: Front
- Base No.: <62900
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6F2Z-1762900-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Seat Cover, Rear Part Number: 3F2Z-1763804-CAC
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Seat Cover, Rear; Cover Assembly - Rear Seat Cushion
- Manufacturer Note: (L7)
- Position: Rear
- Base No.: <63804
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-1763804-CAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Seat Back Cover, Front Driver Side Part Number: 6F2Z-1764417-HC
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Base No.: <64416
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-1764417-HC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Seat Cover, Front Part Number: 5F2Z-1762900-JAA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front
- Position: Front
- Base No.: <62900
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5F2Z-1762900-JAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2007 Ford Freestar Seat Cover

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Seat Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Seat Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestar Seat Cover Parts Q&A

Q: How to service the third row seat cover backrest on 2007 Ford Freestar?
A: Service work on the third row seat backrest cover starts with removing the third row seat and continuing with the removal of the third row backrest. The next step requires using the LH head restraint sleeve button to eliminate the three head restraints. The backrest J-clip requires release before removing two screws that detach the backrest pull-strap handle assembly. Detach the hardboard panel underneath the backrest trim cover but maintain care when separating the hook and loop fasteners because you may harm the hook and loop strip on the seat backrest foam pad. The work process requires a complete removal of three hog rings before folding the seat backrest trim cover. The inboard and outboard head restraint sleeves operate on different mechanisms so maintain their individuality because you will need to squeeze each sleeve tip while pulling its six sleeves from the frame tube. The process ends with utilizing reverse order to reinstall everything after removing the seat backrest trim cover.