How to service a shock absorber on 2007 Ford Freestar?

The service of shock absorbers requires the vehicle to be set to NEUTRAL position and placed on a hoist. Place a jack stand beneath the rear axle so that the entire U-channel of the axle fits securely inside the jack stand saddle without causing any damage. Start by removing the lower bolt and nut from the shock absorber which requires installation of the new part by torquing the lower bolt to 80 Nm (59 ft. lbs). The shock absorber installation process starts with removing the upper bolt and nut but requires a final tightening of 103 Nm (76 ft. lbs) when it goes in. End the installation process by repeating the backward procedure for shock absorber removal. Using equivalent suspension fasteners which share the same part number as originals will offer the best service outcomes since inferior fasteners can trigger major service complications. The specified torque values should always be followed for component retention throughout the reassembly stage.

OEM 2007 Ford Freestar Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
2007 Ford Freestar Shock Absorber, Rear
Part Number: 6F2Z-18125-AB
$40.24 MSRP: $54.76
You Save: $14.52 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear
- Position: Rear
- Replaced by: 2F2Z-18125-B
- Base No.: 18125
- Item Weight: 4.60 Pounds
- Item Dimensions: 3.5 x 3.4 x 21.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-18125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Shock Absorber, Rear
Part Number: 2F2Z-18125-B
$40.24 MSRP: $54.76
You Save: $14.52 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 6F2Z-18125-A, ASH-24577, 2F2Z-18125-A, 3F2Z-18125-AA, 2F2Z-18125-AB, ASH-239, ASH-1121, ASH-52, 6F2Z-18125-AB
- Base No.: 18125
- Item Weight: 4.80 Pounds
- Item Dimensions: 20.9 x 3.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F2Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2007 Ford Freestar Strut, Front
Part Number: 3F2Z-18124-AA
Product Specifications
- Other Name: Shock Absorber Assembly; Front Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Manufacturer Note: Includes Attaching Hardware
- Position: Front
- Replaces: 6F2Z-18124-AD, AST-233
- Base No.: 18124
- Item Weight: 11.50 Pounds
- Item Dimensions: 29.3 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3F2Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2007 Ford Freestar Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestar Shock Absorber Parts Questions & Experts Answers

Q: How to service a shock absorber on 2007 Ford Freestar?
A: The service of shock absorbers requires the vehicle to be set to NEUTRAL position and placed on a hoist. Place a jack stand beneath the rear axle so that the entire U-channel of the axle fits securely inside the jack stand saddle without causing any damage. Start by removing the lower bolt and nut from the shock absorber which requires installation of the new part by torquing the lower bolt to 80 Nm (59 ft. lbs). The shock absorber installation process starts with removing the upper bolt and nut but requires a final tightening of 103 Nm (76 ft. lbs) when it goes in. End the installation process by repeating the backward procedure for shock absorber removal. Using equivalent suspension fasteners which share the same part number as originals will offer the best service outcomes since inferior fasteners can trigger major service complications. The specified torque values should always be followed for component retention throughout the reassembly stage.