How to service the coolant reservoir on 2007 Ford Fusion?

To maintain the coolant reservoir, drain the cooling system, remove the wiring retainer and unconnect the radiator vent and lower degas bottle hoses. Take out the degas bottle by unscrewing the nut and bolt. Installation is to be repeated, tightening to 9 Nm, and then the steps are to be reversed and the cooling system is to be filled.

OEM 2007 Ford Fusion Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2007 Ford Fusion Reservoir Part Number: 6E5Z-8A080-AA
$22.48 MSRP: $33.45
You Save: $10.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Base No.: 8A080
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.6 x 9.4 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Ford Fusion Coolant Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Fusion Coolant Reservoir Parts Q&A

Q: How to service the coolant reservoir on 2007 Ford Fusion?
A: To maintain the coolant reservoir, drain the cooling system, remove the wiring retainer and unconnect the radiator vent and lower degas bottle hoses. Take out the degas bottle by unscrewing the nut and bolt. Installation is to be repeated, tightening to 9 Nm, and then the steps are to be reversed and the cooling system is to be filled.