FordParts
My Garage
My Account
Cart
OEM 2008 Ford Fusion Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2008 Ford Fusion Reservoir Part Number: 6E5Z-8A080-AA
$22.48 MSRP: $33.45You Save: $10.97 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Base No.: 8A080
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.6 x 9.4 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Fusion Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir on 2.3L, 3.0L, and 3.5L engines on 2008 Ford Fusion?A: Before conducting maintenance on the coolant reservoir of 2.3L, 3.0L and 3.5L engines ensure the engine temperature is low because opening the cooling system presents risks of serious injuries from steam pressure and hot liquid. The release of cooling system pressure starts when users twist the pressure relief cap counter-clockwise by one half turn before removing the cap. Hose clamp pliers should secure the lower degas bottle hose while a suitable suction device draws coolant from the bottle. Remove any wiring retainer surrounding the degas bottle before disconnecting both hoses which connect the radiator and degas bottle. Place all components aside. The degas bottle-to-thermostat housing hose requires disconnecting for 3.5L engines followed by its placement aside. The next step requires users to remove the nut from the lower degas bottle together with its bolt then detach the bottle from its installation. The fasteners must be tightened to 9 Nm (80 lb-inch) while following the opposite installation process for the degas bottle. Follow the procedure by adding the specified coolant mixture to reach the proper fill level inside of the degas bottle.