How to service and repair the front brake pads for the 4.0L SOHC and 4.6L (3V) on 2007 Ford Mustang?

Before servicing or repairing the front brake pads for 4.0L SOHC and 4.6L (3V) models use only DOT 3 motor vehicle brake fluid because it protects brake components from permanent damage. You should inspect the brake fluid in the reservoir and drain some fluid to achieve a half-full state when needed. Mount the automobile on a hoist when it operates in neutral gear. Start the brake caliper service by removing the two brake caliper guide pin bolts then placing the caliper carefully aside on mechanic's wire support to protect the brake hose from damage. Worn brake pads need replacement when their thickness exceeds the allowed level beyond the metal backing plate or rivets and all four spring clips should be discarded. It is necessary to evaluate the brake caliper for leaks as well as boot damage followed by brake caliper anchor plate assembly evaluation for binding issues or wear. Additionally the guide pins must receive recommended grease application and you should consider replacing the anchor plate if it shows signs of excessive wear. A suitable instrument should compress caliper pistons into brake caliper bores but pad lining material must stay free from oil grease brake fluid and other contaminants. After installing four new spring clips and two new brake pads you must place the brake caliper onto the anchor plate while fastening it with new guide pin bolts to a torque of 34 Nm (25 ft. lbs.). The maintenance checklist includes making a brake fluid reservoir clean-fluid fill-up before checking if the brakes work correctly.

OEM 2007 Ford Mustang Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Pads found

View related parts
2007 Ford Mustang Brake Pads, Front Part Number: 7R3Z-2001-A
$120.45 MSRP: $181.67
You Save: $61.22 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Disc Brake Pad Set
- Position: Front
- Base No.: 2001
- Item Weight: 5.40 Pounds
- Item Dimensions: 6.2 x 3.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2007 Ford Mustang Brake Pads, Front Part Number: 5U2Z-2V001-K
$46.59 MSRP: $66.65
You Save: $20.06 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: 5U2Z-2V001-E, 9R3Z-2001-B, BRF-1405, G2MZ-2V001-AG, BR-1081
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.8 x 5.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-2V001-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Brake Pads, Rear Part Number: CR3Z-2200-A
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Rear; Disc Brake Pad Set; Rear Pads
- Position: Rear
- Replaces: 7R3Z-2200-A
- Base No.: 2200
- Item Weight: 2.70 Pounds
- Item Dimensions: 7.0 x 4.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CR3Z-2200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2007 Ford Mustang Brake Pads, Rear Part Number: 8R3Z-2200-A
Product Specifications
- Other Name: Shoe And Lining Assembly; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Replaces: 5R3Z-2200-B
- Base No.: 2200
- Item Weight: 2.70 Pounds
- Item Dimensions: 3.2 x 4.8 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Brake Pads, Front Part Number: 9R3Z-2001-A
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Front
- Replaces: 7R3Z-2001-B, 6R3Z-2001-A
- Base No.: 2001
- Item Weight: 5.10 Pounds
- Item Dimensions: 3.3 x 5.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9R3Z-2001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2007 Ford Mustang Front Pads Part Number: 7R3Z-2001-B
Product Specifications
- Other Name: Kit - Brake Shoe; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Brake Pads
- Manufacturer Note: Warranty Eligible
- Position: Front
- Replaced by: 9R3Z-2001-A
- Item Weight: 5.50 Pounds
- Item Dimensions: 3.5 x 4.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2001-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2007 Ford Mustang Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Mustang Brake Pads Parts Q&A

Q: How to service and repair the front brake pads for the 4.0L SOHC and 4.6L (3V) on 2007 Ford Mustang?
A: Before servicing or repairing the front brake pads for 4.0L SOHC and 4.6L (3V) models use only DOT 3 motor vehicle brake fluid because it protects brake components from permanent damage. You should inspect the brake fluid in the reservoir and drain some fluid to achieve a half-full state when needed. Mount the automobile on a hoist when it operates in neutral gear. Start the brake caliper service by removing the two brake caliper guide pin bolts then placing the caliper carefully aside on mechanic's wire support to protect the brake hose from damage. Worn brake pads need replacement when their thickness exceeds the allowed level beyond the metal backing plate or rivets and all four spring clips should be discarded. It is necessary to evaluate the brake caliper for leaks as well as boot damage followed by brake caliper anchor plate assembly evaluation for binding issues or wear. Additionally the guide pins must receive recommended grease application and you should consider replacing the anchor plate if it shows signs of excessive wear. A suitable instrument should compress caliper pistons into brake caliper bores but pad lining material must stay free from oil grease brake fluid and other contaminants. After installing four new spring clips and two new brake pads you must place the brake caliper onto the anchor plate while fastening it with new guide pin bolts to a torque of 34 Nm (25 ft. lbs.). The maintenance checklist includes making a brake fluid reservoir clean-fluid fill-up before checking if the brakes work correctly.