How to service and repair the front brake line on 2007 Ford Mustang?

Before installing the new bolt to service front brake flexible hoses the driver must first eliminate the brake caliper flow bolt and discard both copper washers before tightening the bolt to 40 Nm (30 ft. lbs). When installing the brake flexible hose reconnect the tube fitting to the brake hole while tightening it to 17 Nm (13 ft. lbs.). The brake flexible hose can be detached by removing its bracket bolts and reinstallation requires tightening these bolts to 20 Nm (15 ft. lbs.). Perform the opposite steps of installation following the removal procedure while bleeding the brake system afterward. The use of incorrect DOT 3 fluid in brake systems will result in lasting brake component deterioration and make the brakes completely nonfunctional. Brake fluid needs immediate water-based washing from painted and plastic surfaces because it has damaging properties. In case of emergency regarding brake fluid medical needs please contact Ford/Motorcraft products in the USA or Canada at 1-800-959-3673 and obtain the product Material Safety Data Sheet (MSDS) if available for proper consultation.

OEM 2007 Ford Mustang Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2007 Ford Mustang Flex Hose, Front Driver Side Part Number: 8R3Z-2078-B
$31.49 MSRP: $43.56
You Save: $12.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Brake Hydraulic Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7R3Z-2078-B, 6R3Z-2078-F
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.3 x 2.7 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Flex Hose, Front Passenger Side Part Number: 8R3Z-2078-D
$24.70 MSRP: $34.17
You Save: $9.47 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 6R3Z-2078-D, 7R3Z-2078-D
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.7 x 2.7 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Flex Hose, Rear Driver Side Part Number: 7R3Z-2A442-D
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6R3Z-2A442-E
- Base No.: 2A442
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.8 x 1.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Flex Hose, Rear Passenger Side Part Number: 7R3Z-2A442-B
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6R3Z-2A442-D
- Base No.: 2A442
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.3 x 1.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Flex Hose, Rear Driver Side Part Number: 7R3Z-2A442-F
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6R3Z-2A442-B, 7R3Z-2A442-C
- Base No.: 2A442
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.4 x 2.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2007 Ford Mustang Flex Hose, Rear Passenger Side Part Number: 7R3Z-2A442-E
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 7R3Z-2A442-A, 6R3Z-2A442-C
- Base No.: 2A442
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.8 x 2.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2007 Ford Mustang Flex Hose, Front Passenger Side Part Number: 8R3Z-2078-H
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 6R3Z-2078-C, 7R3Z-2078-C, 8R3Z-2078-C, 8R3Z-2078-F
- Base No.: 2078
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.8 x 2.7 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Flex Hose, Front Driver Side Part Number: 8R3Z-2078-G
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7R3Z-2078-A, 6R3Z-2078-E, 8R3Z-2078-E, 8R3Z-2078-A
- Base No.: 2078
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.3 x 2.8 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford Mustang Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Mustang Brake Line Parts Q&A

Q: How to service and repair the front brake line on 2007 Ford Mustang?
A: Before installing the new bolt to service front brake flexible hoses the driver must first eliminate the brake caliper flow bolt and discard both copper washers before tightening the bolt to 40 Nm (30 ft. lbs). When installing the brake flexible hose reconnect the tube fitting to the brake hole while tightening it to 17 Nm (13 ft. lbs.). The brake flexible hose can be detached by removing its bracket bolts and reinstallation requires tightening these bolts to 20 Nm (15 ft. lbs.). Perform the opposite steps of installation following the removal procedure while bleeding the brake system afterward. The use of incorrect DOT 3 fluid in brake systems will result in lasting brake component deterioration and make the brakes completely nonfunctional. Brake fluid needs immediate water-based washing from painted and plastic surfaces because it has damaging properties. In case of emergency regarding brake fluid medical needs please contact Ford/Motorcraft products in the USA or Canada at 1-800-959-3673 and obtain the product Material Safety Data Sheet (MSDS) if available for proper consultation.