FordParts
My Garage
My Account
Cart
OEM 2007 Ford Ranger EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 EGR Valves found
2007 Ford Ranger EGR Valve Part Number: XR1Z-9D475-BA
$77.24 MSRP: $127.09You Save: $49.85 (40%)Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 7L5Z-9D475-B, XR1Z-9D475-AB
- Base No.: 9D475
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 3.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR1Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Ranger EGR Valve Part Number: XC2Z-9D475-AB
$54.32 MSRP: $87.64You Save: $33.32 (39%)Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: XC2Z-9D475-AA, F7UZ-9D475-A4A
- Base No.: 9D475
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.3 x 4.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-9D475-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Ranger EGR Valve Part Number: 1L5Z-9D475-AA
$77.90 MSRP: $128.18You Save: $50.28 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Base No.: 9D475
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.5 x 3.4 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9D475-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Ranger EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Ranger EGR Valve Parts Q&A
- Q: How to Service the EGR Valve on 2007 Ford Ranger?A: The exhaust gas recirculation (EGR) valve service process requires disconnecting the battery ground cable then draining the cooling system. Your service of the EGR valve requires disconnecting the coolant bypass hose and the EGR valve electrical connector. The shifting mechanism of manual transmission vehicles needs to be eliminated before the service process begins. First remove the rear driveshaft as well as the exhaust downpipe. A suitable transmission jack should support the transmission while technicians remove three bolts on each side of the crossmember and detach the transmission electrical connector from the crossmember before tightening all bolts to 99 Nm (73 lb-ft) each time. The crossmember requires removal along with retaining nuts so install it again while securing the nuts to 99 Nm (73 lb-ft). By lowering the transmission obtain access to the EGR valve, the EGR coolant hose should be disconnected before removing bolts which hold the EGR valve in place and require new gasket installation. The gasket mating surfaces should be cleaned before installing new gaskets with the EGR valve bolts secured to 20 Nm (15 lb-ft). The installation ends when performing the removal procedure in reverse order.