FordParts
My Garage
My Account
Cart
OEM 2007 Ford Taurus Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Shift Cables found
2007 Ford Taurus Shift Control Cable Part Number: 4F1Z-7E395-AA
Product Specifications- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable
- Manufacturer Note: #4F1P AA,AB, AX4S, Column shift
- Base No.: 7E395
- Item Weight: 0.80 Pounds
- Item Dimensions: 17.0 x 16.7 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-7E395-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Taurus Shift Control Cable Part Number: 2F1Z-7E395-AA
Product Specifications- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable
- Manufacturer Note: floor shift
- Replaces: XF1Z-7E395-AA
- Base No.: 7E395
- Item Weight: 2.20 Pounds
- Item Dimensions: 17.9 x 18.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-7E395-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Taurus Shift Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Taurus Shift Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Taurus Shift Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Taurus Shift Cable Parts Q&A
- Q: How to Service the Shift Cable and Bracket for a Column Shift on 2007 Ford Taurus?A: You must detach the LH lower instrument panel trim before servicing the shift cable and bracket for a column shift. Install this panel at 7 Nm (62 inch lbs) torque. A screwdriver should be employed on the left side of the column to pry the shift cable free from the pivot ball. The shift cable can be withdrawn from the retaining bracket after unlocking its locking tab. Proceed to remove the cruise control actuator starting from the engine compartment. Unscrew the shift cable from the dash panel grommet and take off the manual control lever attaching nut which requires a torque of 20 Nm (15 foot pounds) upon reinstall. The locking tab must be lifted while using upward force on the shift cable to separate it from the transmission shift cable bracket before discarding the locking clip. Pull the shift cable through the dash panel opening as the last step. When installing, reverse the removal process and implement a new locking clip by adjusting the shift cable as required.