FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Mark LT Seat Cushion
Seat Pad Cushion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Seat Cushions found
2007 Lincoln Mark LT Seat Cushion Pad, Front Driver Side Part Number: 5L3Z-18632A23-AA
$200.60 MSRP: $292.00You Save: $91.40 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front Left, Front Left Outer; Seat Cushion
- Manufacturer Note: Driver Seat
- Position: Front Driver Side
- Replaces: 4L3Z-18632A23-AA
- Base No.: <632A22B
- Item Weight: 2.20 Pounds
- Item Dimensions: 25.2 x 25.0 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-18632A23-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Rear Left; Seat Cushion
- Position: Rear Driver Side
- Base No.: <63840B
- Item Weight: 9.90 Pounds
- Item Dimensions: 40.4 x 20.6 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-1663841-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Pad; Seat Cushion
- Position: Passenger Side
- Replaced by: 8L3Z-15632A22-J
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-15632A22-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Rear Right; Seat Cushion
- Position: Rear Passenger Side
- Base No.: <63840A
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-1663840-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Mark LT Seat Cushion
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Mark LT Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Mark LT Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Mark LT Seat Cushion Parts Q&A
- Q: How to service the rear seat cushion on 2007 Lincoln Mark LT?A: Begin the service procedure of the rear seat cushion by first removing its rear seat cushion. The service starts by removing the four rear seat lower anchors and tethers for children (LATCH) bolts while uninstalling the LATCH system and then re-tightening them to 6 Nm (53 lb-in). Remove both the 60/40 retention clip in combination with the center support riser. Begin by removing the 60 percent seat support riser bolt but do not exceed 25 Nm torque when installing again followed by the support riser pivot bolt and bushing that requires 40 Nm torque. The technician should remove the left support riser and latch handle screws, screws from the latch cover and the latch cushion bolts. All those removed elements should be tightened to 30 Nm (22 lb-ft) upon reassembly. Take care to avoid tearing seat upholstery from the foam pad while disconnecting it from the hook-and-loop strip before removing the cushion trim cover by extracting hog rings from their place. The operative steps include taking out the cushion foam pad and also removing the inboard pivot bushing. The right support riser pivot bolt and bushing together with the support riser bolt must receive a torque of 40 Nm (30 lb-ft) during reinstallation. The procedure to repair this component involves removing the latch handle screw and handle as well as the latch cover screw and cover and the latch bolt and latch while tightening the latch bolt to 30 Nm (22 lb-ft) during the reassembly process. Take caution when removing the upholstery from its hook-and-loop strip before you can proceed to remove the trim cover consisting of hog rings, foam pad, and inboard pivot bushing. The process ends with the opposite procedure of disassembly.