How to service the LH catalytic converter on 2007 Lincoln MKX?

The service of LH catalytic converter requires motorists to place their vehicle in neutral position while mounting the vehicle on a hoist. The service of the catalytic converter heat shield operates independently from the other components. You must use fresh fasteners and gaskets together with thorough cleaning of flange surfaces before adding the new gasket to create a sound seal. Begin the service work by separating the electrical connector of the catalyst monitor sensor and then pull out the exhaust Y-pipe. Relocate the two bolts that anchor the catalytic converter support bracket at the transmission but tighten them to 48 Nm (35 ft. lbs) before reinstalling. You must separate the LH catalytic converter through removal of four securing nuts which will be discarded along with the gasket. The procedure for new catalytic converter installation requires fresh nuts and a gasket along with 40 Nm (30 ft. lbs) torque settings before performing the reverse procedure to achieve completion.

OEM 2007 Lincoln MKX Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Catalytic Converters found

View related parts
2007 Lincoln MKX Catalytic Converter, Passenger Side Part Number: 7T4Z-5E212-A
$894.75 MSRP: $1122.86
You Save: $228.11 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Manufacturer Note: Rear
- Position: Passenger Side
- Base No.: 5E212A
- Item Weight: 8.40 Pounds
- Item Dimensions: 19.2 x 17.9 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2007 Lincoln MKX Catalytic Converter, Front Driver Side Part Number: 7T4Z-5E213-A
$777.00 MSRP: $1050.00
You Save: $273.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Position: Front Driver Side
- Base No.: 5E212A
- Item Weight: 7.70 Pounds
- Item Dimensions: 17.5 x 14.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E213-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2007 Lincoln MKX Catalytic Converter, Front Part Number: 7T4Z-5E213-BC
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right
- Position: Front
- Base No.: 5E212A
- Item Weight: 13.20 Pounds
- Item Dimensions: 17.3 x 14.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E213-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2007 Lincoln MKX Catalytic Converter Part Number: 7T4Z-5E212-BC
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left
- Manufacturer Note: Rear
- Base No.: 5E212A
- Item Weight: 12.50 Pounds
- Item Dimensions: 19.4 x 17.7 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E212-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS

2007 Lincoln MKX Catalytic Converter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln MKX Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln MKX Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln MKX Catalytic Converter Parts Q&A

Q: How to service the LH catalytic converter on 2007 Lincoln MKX?
A: The service of LH catalytic converter requires motorists to place their vehicle in neutral position while mounting the vehicle on a hoist. The service of the catalytic converter heat shield operates independently from the other components. You must use fresh fasteners and gaskets together with thorough cleaning of flange surfaces before adding the new gasket to create a sound seal. Begin the service work by separating the electrical connector of the catalyst monitor sensor and then pull out the exhaust Y-pipe. Relocate the two bolts that anchor the catalytic converter support bracket at the transmission but tighten them to 48 Nm (35 ft. lbs) before reinstalling. You must separate the LH catalytic converter through removal of four securing nuts which will be discarded along with the gasket. The procedure for new catalytic converter installation requires fresh nuts and a gasket along with 40 Nm (30 ft. lbs) torque settings before performing the reverse procedure to achieve completion.