FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln MKX Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Catalytic Converters found
2008 Lincoln MKX Catalytic Converter, Passenger Side Part Number: 7T4Z-5E212-A
$894.75 MSRP: $1122.86You Save: $228.11 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Manufacturer Note: Rear
- Position: Passenger Side
- Base No.: 5E212A
- Item Weight: 8.40 Pounds
- Item Dimensions: 19.2 x 17.9 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKX Catalytic Converter, Front Driver Side Part Number: 7T4Z-5E213-A
$777.00 MSRP: $1050.00You Save: $273.00 (26%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Position: Front Driver Side
- Base No.: 5E212A
- Item Weight: 7.70 Pounds
- Item Dimensions: 17.5 x 14.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E213-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKX Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKX Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKX Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln MKX Catalytic Converter Parts Q&A
- Q: How to service the LH catalytic converter on 2008 Lincoln MKX?A: The servicing of the LH catalytic converter should start with placing the vehicle in neutral on a hoist. Service of the catalytic converter heat shield occurs separately from other components. New fasteners must be used for installation together with clean flange faces before using the new gasket to achieve proper sealing. It is necessary to remove both the exhaust Y-pipe and the catalyst monitor sensor electrical connector. First remove the two bolts which fasten the catalytic converter support bracket to the transmission while you install them tightly at 48 Nm (35 lb-ft). Install new nuts to both catalytic converter ends with 40 Nm (30 lb-ft) torque and throw away the nuts along with the gasket. You should also replace all four LH catalytic converter-to-exhaust manifold studs that need to be tightened to 25 Nm (18 lb-ft). The last step includes the reverse removal method with new gasket installation and nuts and studs placement.
Related 2008 Lincoln MKX Parts
2008 Lincoln MKX Catalytic Converter Gasket
2008 Lincoln MKX Exhaust Flange Gasket
2008 Lincoln MKX Exhaust Hanger
2008 Lincoln MKX Exhaust Heat Shield
2008 Lincoln MKX Exhaust Manifold
2008 Lincoln MKX Exhaust Manifold Gasket
2008 Lincoln MKX Exhaust Pipe
2008 Lincoln MKX Muffler
2008 Lincoln MKX Muffler Hanger Straps
2008 Lincoln MKX PCV Valve
2008 Lincoln MKX Tail Pipe
2008 Lincoln MKX Vapor Canister