FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln MKX Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Shock Absorbers found
2007 Lincoln MKX Shock Absorber Part Number: 8A1Z-18125-C
$65.20 MSRP: $109.45You Save: $44.25 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Shock Absorber; Suspension Strut and Shock Assembly; Complete Strut Set.; Shock
- Replaced by: 8T4Z-18125-A
- Replaces: 7A1Z-18125-CA
- Base No.: 18125
- Item Weight: 6.40 Pounds
- Item Dimensions: 3.4 x 3.4 x 22.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8A1Z-18125-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln MKX Strut, Passenger Side Part Number: 7A1Z-18124-AB
$123.97 MSRP: $200.00You Save: $76.03 (39%)Product Specifications- Other Name: Kit - Shock Absorber; Suspension Strut and Shock Assembly; Complete Strut Set.; Shock Absorber
- Position: Passenger Side
- Replaces: 7A1Z-18124-A
- Base No.: 18124
- Item Weight: 15.50 Pounds
- Item Dimensions: 7.5 x 7.4 x 32.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A1Z-18124-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln MKX Strut, Driver Side Part Number: 7A1Z-18124-BB
Product Specifications- Other Name: Kit - Shock Absorber; Suspension Strut and Shock Assembly; Complete Strut Set.; Shock Absorber
- Position: Driver Side
- Replaces: 7A1Z-18124-B
- Base No.: 18124
- Item Weight: 16.70 Pounds
- Item Dimensions: 7.5 x 7.5 x 32.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A1Z-18124-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln MKX Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln MKX Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln MKX Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln MKX Shock Absorber Parts Q&A
- Q: How to service the shock absorber on 2007 Lincoln MKX?A: Service of the shock absorber begins by removing the quarter trim panel. Install the new shock absorber after you remove its upper nuts according to the shipping instructions while tightening both nuts to 25 Nm (18 ft. lbs). Start by taking out the wheel assembly followed by location of a suitable jackstand beneath the lower arm. The shock absorber maintenance process requires the removal and disposal of its lower bolt and flagnut from the device. The new shock absorber installation requires that you fasten the lower bolt to 80 Nm (59 ft. lbs). The bushing fasteners need tight installation when the vehicle rests on the wheel and tires. Finish the installation by performing the reverse order of the removal process. New hardware must have the same part number and specific torque values should be followed to maintain suspension system retention and performance.