My Garage
Cart

OEM 2007 Lincoln MKZ Evaporator

A/C Evaporator Core
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Evaporator found

  • 2007 Lincoln MKZ Evaporator - 6H6Z-19860-BA
    2007 Lincoln MKZ Evaporator Diagram - 6H6Z-19860-BA
    View related parts
    Product Specifications
    • Other Name: Evaporator Assembly; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
    • Base No.: 19860
    • Item Weight: 4.10 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6H6Z-19860-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln MKZ Submodels:
    • Base | 6 Cyl 3.5 L GAS

2007 Lincoln MKZ Evaporator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln MKZ Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln MKZ Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln MKZ Evaporator Parts Q&A

  • Q: How to service the evaporator core in an air conditioning system on 2007 Lincoln MKZ?
    A: Performing a leak test should be the first step when servicing the evaporator core unless its removal from the vehicle is necessary. A new receiver/drier cartridge needs to be installed only when physical signs of contamination arise due to an A/C compressor failure or damage to the existing cartridge. Start by taking out the heater core along with evaporator core housing followed by unscrewing the wire harness from the housing. The evaporator core cover needs twenty-five screws removed which will separate the housing into its two component parts. You must pull out the dash panel seal followed by removing the evaporator core. Follow the reverse order of removal to install the new core by applying the right amount of clean PAG oil to the refrigerant system.