My Garage
Cart

OEM 2007 Lincoln MKZ Thermostat

Engine Coolant Thermostat
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

  • 2007 Lincoln MKZ Thermostat - 1X4Z-8575-B
    2007 Lincoln MKZ Thermostat Diagram - 1X4Z-8575-B
    View related parts

    2007 Lincoln MKZ Thermostat Part Number: 1X4Z-8575-B

    $15.63 MSRP: $24.18
    You Save: $8.55 (36%)
    Product Specifications
    • Other Name: Thermostat Assembly; Engine Coolant Thermostat
    • Replaces: 1X4Z-8575-A, 1X4Z-8575-FA, RT-1228, RT-1172
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1X4Z-8575-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following 2007 Lincoln MKZ Submodels:
    • Base, Black Label | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2007 Lincoln MKZ Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln MKZ Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln MKZ Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln MKZ Thermostat Parts Q&A

  • Q: How to service the thermostat for a 3.5L engine on 2007 Lincoln MKZ?
    A: The procedure of servicing the 3.5L engine thermostat starts with draining the cooling system liquid. Start by taking away the air cleaner followed by removing the outlet pipe before disconnecting the lower radiator hose from the thermostat housing cover for placement aside. Detach the two bolts followed by removal of the thermostat housing cover and O-ring seal and thermostat. After inspecting the O-ring you should replace it with a new one if needed. Installation of the new thermostat requires engine coolant to lubricate the O-ring seal before securing the bolts to a torque of 10 Nm (89 inch lbs.). Close the system by following the reversal steps of the removal procedure while filling and bleeding the cooling system.