FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Navigator Door Check
Front Door Check Strap- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Door Checks found
2007 Lincoln Navigator Door Check, Front Part Number: 7L1Z-7823552-A
$32.55 MSRP: $46.17You Save: $13.62 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Check Assembly - Door; Door Check, Front, Rear; Check Arm
- Manufacturer Note: RH/LH
- Position: Front
- Replaces: 2L1Z-7822886-AA
- Base No.: <23552
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.2 x 6.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L1Z-7823552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Navigator Door Check Part Number: 2L7Z-7806200-AA
$31.91 MSRP: $45.27You Save: $13.36 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Stop
- Base No.: <061A58
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L7Z-7806200-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Navigator Door Check
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Navigator Door Check available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Navigator Door Check as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Navigator Door Check Parts Q&A
- Q: How to Service and Repair the Front Door Check on 2007 Lincoln Navigator?A: The service procedure for the front door check requires you to first remove the lower cowl trim panel together with the door scuff plate. The left side requires removal of the parking brake control assembly which should be put aside for the procedure. The next step requires removal of the lower cowl panel weather shield. The process proceeds by disconnecting the 2 door check arm-to-door bolts with subsequent untightening of 2 door check arm nuts. The left side example is shown but the right side procedure is equivalent. Afterward, remove the door check arm from the door opening of the lower cowl panel. Finishing the setup requires doing the opposite steps that were used for removal.