How to service and repair the turn signal switch on all on 2007 Lincoln Navigator?

Service To service the turn signal switch, begin by removing the screws attached to on the lower steering column cover. In the case of power tilt column, unplug the electrical connector. In the case of manual tilt columns, a slide the gear column shroud outward, and then remove the screws and shrouds. Lastly, then de-interconnect the multi-function switch and de-install reverse.

OEM 2007 Lincoln Navigator Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2007 Lincoln Navigator Multifunction Switch Part Number: 7L1Z-13K359-AA
$84.53 MSRP: $115.02
You Save: $30.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Turn Signal & Combination Lever; Windshield Washer Switch.; Wiper Switch
- Manufacturer Note: Multi Function Switch
- Base No.: 13K359
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.2 x 4.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2007 Lincoln Navigator Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Navigator Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Navigator Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Navigator Turn Signal Switch Parts Q&A

Q: How to service and repair the turn signal switch on all on 2007 Lincoln Navigator?
A: Service To service the turn signal switch, begin by removing the screws attached to on the lower steering column cover. In the case of power tilt column, unplug the electrical connector. In the case of manual tilt columns, a slide the gear column shroud outward, and then remove the screws and shrouds. Lastly, then de-interconnect the multi-function switch and de-install reverse.