How to service the rear antenna cable on 2007 Lincoln Town Car?

Service on the rear antenna lead-in cable requires starting with removing the parcel shelf before proceeding to remove the right-hand lower C-pillar trim panel by disconnecting its pin-type retainers then placing the insulation aside. The service requires removal of the right-hand lower A-pillar trim panel together with the right-hand B-pillar trim panel. Separate the antenna lead-in cable at the A-pillar and then lower the right-hand rear corner of the headliner. Begin by unmounting the rear antenna cable at the rear window glass through the removal of the bolt followed by disconnecting the electrical connector and extracting the push pin retainer. Installing a new cable requires keeping the existing cable inside the wiring harness followed by placing the new cable above the body main harness before securing it with wire ties. Tie back or protect the old cable ends using insulation to prevent any noise. The installation ends with reversing all removal steps.

OEM 2007 Lincoln Town Car Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2007 Lincoln Town Car Cable
Part Number: 8W1Z-18812-B
$8.57 MSRP: $11.85
You Save: $3.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Replaces: 4W1Z-18812-BB
- Base No.: 18812B
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-18812-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Executive L, Signature L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Lincoln Town Car Cable
Part Number: 8W1Z-18812-D
$8.34 MSRP: $11.54
You Save: $3.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Replaces: 5W1Z-18812-AA, 8W1Z-18812-A
- Base No.: 18812B
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-18812-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Designer Series, Executive, Signature, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Lincoln Town Car Cable
Part Number: 3W1Z-18812-AB
Product Specifications
- Other Name: Cable Assembly - Extension
- Manufacturer Note: Radio to body cable
- Base No.: 18812
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-18812-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Lincoln Town Car Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Town Car Antenna Cable Parts Questions & Experts Answers

Q: How to service the rear antenna cable on 2007 Lincoln Town Car?
A: Service on the rear antenna lead-in cable requires starting with removing the parcel shelf before proceeding to remove the right-hand lower C-pillar trim panel by disconnecting its pin-type retainers then placing the insulation aside. The service requires removal of the right-hand lower A-pillar trim panel together with the right-hand B-pillar trim panel. Separate the antenna lead-in cable at the A-pillar and then lower the right-hand rear corner of the headliner. Begin by unmounting the rear antenna cable at the rear window glass through the removal of the bolt followed by disconnecting the electrical connector and extracting the push pin retainer. Installing a new cable requires keeping the existing cable inside the wiring harness followed by placing the new cable above the body main harness before securing it with wire ties. Tie back or protect the old cable ends using insulation to prevent any noise. The installation ends with reversing all removal steps.