How to service and repair the rear antenna cable on 2006 Lincoln Town Car?

The process to service and repair the rear antenna lead-in cable begins with parcel shelf removal followed by right-hand lower C-pillar trim panel removal by detaching the pin-type retainers while moving the insulation to the side. The installation process begins by removing both right-hand A-pillar trim panels together with the right-hand B-pillar trim panels. Cut the antenna cable connection at the A-pillar before lowering the right-hand corner of the headliner at its rear section. The removal process requires three steps to extract the rear antenna cable near the rear window glass. Firstly remove the bolt then disconnect the electrical connector and lastly take out the push pin retainer. Use additional cable ties to keep the existing cable positioned within the harness and to fasten the new cable on top of the body main wiring harness while securing old cable ends before tying them back or using insulation to minimize noise interference. The reverse steps from removal should be followed for the installation completion process.

OEM 2006 Lincoln Town Car Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2006 Lincoln Town Car Cable
Part Number: 8W1Z-18812-B
$8.57 MSRP: $11.85
You Save: $3.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Replaces: 4W1Z-18812-BB
- Base No.: 18812B
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-18812-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Executive L, Signature L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Lincoln Town Car Cable
Part Number: 8W1Z-18812-D
$8.34 MSRP: $11.54
You Save: $3.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Replaces: 5W1Z-18812-AA, 8W1Z-18812-A
- Base No.: 18812B
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W1Z-18812-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Designer Series, Executive, Signature, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Lincoln Town Car Cable
Part Number: 3W1Z-18812-AB
Product Specifications
- Other Name: Cable Assembly - Extension
- Manufacturer Note: Radio to body cable
- Base No.: 18812
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-18812-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2006 Lincoln Town Car Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Town Car Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Town Car Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Town Car Antenna Cable Parts Questions & Experts Answers

Q: How to service and repair the rear antenna cable on 2006 Lincoln Town Car?
A: The process to service and repair the rear antenna lead-in cable begins with parcel shelf removal followed by right-hand lower C-pillar trim panel removal by detaching the pin-type retainers while moving the insulation to the side. The installation process begins by removing both right-hand A-pillar trim panels together with the right-hand B-pillar trim panels. Cut the antenna cable connection at the A-pillar before lowering the right-hand corner of the headliner at its rear section. The removal process requires three steps to extract the rear antenna cable near the rear window glass. Firstly remove the bolt then disconnect the electrical connector and lastly take out the push pin retainer. Use additional cable ties to keep the existing cable positioned within the harness and to fasten the new cable on top of the body main wiring harness while securing old cable ends before tying them back or using insulation to minimize noise interference. The reverse steps from removal should be followed for the installation completion process.