FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Town Car Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2007 Lincoln Town Car Reservoir Part Number: 3W1Z-8A080-AA
$24.68 MSRP: $35.00You Save: $10.32 (30%)Product Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Tank; Coolant Reservoir
- Manufacturer Note: #3W13 8A080-AA
- Base No.: 8A080
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.1 x 8.1 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Town Car Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Town Car Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir on 2007 Lincoln Town Car?A: Begin service and repair operations on the coolant reservoir by following safety precautions that involve avoiding unscrewing of the coolant pressure relief cap when conducting work on an operating or hot engine because the cooling system operates under pressure and produces powerful steam and hot liquid emissions. Proceed to vent the pressure through a slow counterclockwise turn of the pressure relief cap before you can remove it. Hose clamp pliers enable you to secure the supply hose of the degas bottle and draw coolant from it using an appropriate suction device. The procedure requires disconnecting the degas bottle overflow hose and supply hose after which you should remove the bolt securing the degas bottle. The degas bottle should be tightened to 10 Nm (89 inch lbs.) along with replacement of constant tension clamps with worm-style clamps to ensure proper installation. Seal the degas bottle procedure by filling it with the required coolant mixture at the specified fill level.