FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Town Car Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Throttle Body found
2007 Lincoln Town Car Throttle Body Part Number: 9W7Z-9E926-A
$241.76 MSRP: $387.27You Save: $145.51 (38%)Product Specifications- Other Name: Throttle Body And Motor Assembly; Electronic Fuel Injection Throttle Body Assembly.
- Manufacturer Note: Non Heated
- Replaces: 3L5Z-9E926-AD, 6R3Z-9E926-AA, 9W7Z-9E926-B
- Base No.: 9E926
- Item Weight: 3.00 Pounds
- Item Dimensions: 6.0 x 4.5 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9W7Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Town Car Throttle Body
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Town Car Throttle Body Parts Q&A
- Q: How to service and repair the throttle body safely on 2007 Lincoln Town Car?A: Safety measures need to be taken first because open flames and smoking violate safety precautions when servicing fuel-related components which contain highly flammable mixtures. Start the process by unclipping the battery cable and extract the outlet tube from the air cleaner. The service requires you to disconnect both the throttle actuator control (TAC) and throttle position (TP) sensor electrical connectors. Lift off the throttle body by removing its four bolts and throwing away the associated TB gasket. A new TB gasket should be applied before installing the throttle body and four bolts which should be tightened through two sequential steps at 9 Nm (80 lb-in) then another 90-degree rotation. The process ends with reinstallation of the air cleaner outlet tube followed by connecting the TAC and TP sensor electrical connectors and finally reconnecting the negative battery cable.