How to Service and Repair the Vapor Canister on 2007 Mercury Mariner?

Service and maintenance of the evaporative emission control canister starts by positioning the motor vehicle into NEUTRAL on a hoist. Following the procedures disconnect the battery cable ground connection to prevent fuel vapor ignition by electrical sparks. The service requires users to remove the evaporative emission (EVAP) canister vent solenoid electrical connector and unfasten the fuel vapor hose from the dust separator. First detach the fuel vapor tube quick connect coupling from the EVAP canister before removing two nuts and three bolts that fasten the EVAP canister assembly. For the new canister installation users must tighten all fasteners to 7 Nm (62 lb-in) before reversing their removal steps. A leak test for the evaporative emission system should be performed after installation and a necessary repair verification drive cycle should be completed.

OEM 2007 Mercury Mariner Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vapor Canisters found

View related parts
2007 Mercury Mariner Vapor Canister
Part Number: 7L8Z-9D653-E
$205.44 MSRP: $349.09
You Save: $143.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Fuel Vapour; Vapor Canister Purge Solenoid; Canister Hose
- Replaced by: 5L8Z-9D653-BB
- Replaces: 7L8Z-9D653-C, CX-2135, 5L8Z-9S327-AA, 7L8Z-9S327-B, CX-1952, 7L8Z-9D653-D, 5L8Z-9D653-BA
- Base No.: 9G297
- Item Weight: 5.40 Pounds
- Item Dimensions: 7.7 x 7.7 x 24.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-9D653-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mariner Submodels:
- Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Mercury Mariner Vapor Canister
Part Number: 5L8Z-9D653-BB
$205.44 MSRP: $349.09
You Save: $143.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 8.50 Pounds
- Item Dimensions: 5.8 x 28.3 x 15.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-9D653-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mariner Submodels:
- Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2007 Mercury Mariner Vapor Canister
Part Number: 5M6Z-9D653-DA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Base No.: 9D653A
- Item Weight: 9.60 Pounds
- Item Dimensions: 8.5 x 21.8 x 20.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-9D653-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mariner Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2007 Mercury Mariner Vapor Canister
Part Number: 5M6Z-9C985-AA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Separator; Reservoir; Cannister - Fuel Vapour Store
- Base No.: 9D653A
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-9C985-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mariner Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)

2007 Mercury Mariner Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mariner Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mariner Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Mariner Vapor Canister Parts Questions & Experts Answers

Q: How to Service and Repair the Vapor Canister on 2007 Mercury Mariner?
A: Service and maintenance of the evaporative emission control canister starts by positioning the motor vehicle into NEUTRAL on a hoist. Following the procedures disconnect the battery cable ground connection to prevent fuel vapor ignition by electrical sparks. The service requires users to remove the evaporative emission (EVAP) canister vent solenoid electrical connector and unfasten the fuel vapor hose from the dust separator. First detach the fuel vapor tube quick connect coupling from the EVAP canister before removing two nuts and three bolts that fasten the EVAP canister assembly. For the new canister installation users must tighten all fasteners to 7 Nm (62 lb-in) before reversing their removal steps. A leak test for the evaporative emission system should be performed after installation and a necessary repair verification drive cycle should be completed.