Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Mercury Mariner Wheel Cylinder

Brake Wheel Cylinder
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Cylinders found

  • 2007 Mercury Mariner Wheel Cylinder - YL8Z-2128-BA
    2007 Mercury Mariner Wheel Cylinder Diagram - YL8Z-2128-BA
    View related parts

    2007 Mercury Mariner Wheel Cylinder Overhaul Kit
    Part Number: YL8Z-2128-BA

    $20.29 MSRP: $27.61
    You Save: $7.32 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Kit - Wheel Brake Cylinder; Wheel Cylinder Repair Kit; Kit - Wheel Brake Cylinder Repair
    • Base No.: 2128
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 6.4 x 5.9 x 6.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: YL8Z-2128-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Mercury Mariner Submodels:
    • Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
  • 2007 Mercury Mariner Wheel Cylinder - YL8Z-2261-BB
    2007 Mercury Mariner Wheel Cylinder Diagram - YL8Z-2261-BB
    View related parts

    2007 Mercury Mariner Wheel Cylinder, Rear
    Part Number: YL8Z-2261-BB

    Product Specifications
    • Other Name: Cylinder Assembly - Rear; Cylinder Assembly - Rear Brake
    • Position: Rear
    • Replaces: YL8Z-2261-BA
    • Base No.: 2261
    • Item Weight: 1.80 Pounds
    • Item Dimensions: 2.9 x 2.1 x 3.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: YL8Z-2261-BB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Mercury Mariner Submodels:
    • Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Mercury Mariner Wheel Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mariner Wheel Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mariner Wheel Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Mariner Wheel Cylinder Parts Questions & Experts Answers

  • Q: How to remove and replace the wheel cylinder while ensuring safety and proper handling of brake fluid on 2007 Mercury Mariner?
    A: Before wheel cylinder installation, motorists need to use approved DOT 3 motor vehicle brake fluid only due to the permanent component damage that results from other types which leaves the brakes non-operational and poses a risk of injury to individuals. One must always read warning statements found within the product label and consult emergency medical help through 1-800-959-3673 specifically for Ford/Motorcraft products. Brake fluid affects both painted and plastic surfaces negatively; therefore washing it away immediately with water becomes necessary when a spill occurs. The brake shoe removal should start each process followed by disconnecting brake tube fitting nuts before tightening them to 15 Nm (11 ft. lbs.) during reinstalls. The wheel cylinder can be extracted when you remove its two bolts. Reinstallation requires tightening the bolts to 12 Nm (9 ft. lbs.). To finish the installation you should perform the opposite of removal steps while completing a brake hydraulic system bleed.

Related 2007 Mercury Mariner Parts

Alternate Year Models

+
2006 Mercury Mariner Wheel Cylinder 2008 Mercury Mariner Wheel Cylinder