My Garage
Cart

OEM 2007 Mercury Monterey Thermostat

Engine Coolant Thermostat
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

  • 2007 Mercury Monterey Thermostat Diagram - XR3Z-8575-BA
    View related parts

    2007 Mercury Monterey Thermostat Part Number: XR3Z-8575-BA

    $7.31 MSRP: $11.31
    You Save: $4.00 (36%)
    Product Specifications
    • Other Name: Thermostat Assembly; Engine Coolant Thermostat
    • Manufacturer Note: Thermostat 192 #XR3E 8597-BA
    • Replaces: F88Z-8575-AA, E8TZ-8575-A, XL2Z-8575-AB
    • Base No.: 8575
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 6.2 x 4.1 x 4.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XR3Z-8575-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Mercury Monterey Submodels:
    • Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

2007 Mercury Monterey Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Monterey Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Monterey Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Monterey Thermostat Parts Q&A

  • Q: How to service the thermostat on 2007 Mercury Monterey?
    A: Draining the cooling system must be the initial step before servicing the thermostat. The service of the thermostat begins by removing the air cleaner outlet tube while disconnecting the upper radiator hose from the thermostat housing. Your next step should be to take off the thermostat housing after discarding its gasket and removing the thermostat housing-to-engine bolts. The bolts should be tightened in two steps starting from 8 Nm (71 inch lbs), followed by another 60 degrees of additional tightening. It is essential to mark the position of the vent pin when removing the thermostat. Reinstall the new thermostat according to the steps used for removal. The service concludes by filling typing and bleeding the cooling system.