FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Mountaineer Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Bumpers found
2007 Mercury Mountaineer Bumper Cover, Front Part Number: 6L9Z-17D957-DAPTM
$194.21 MSRP: $282.70You Save: $88.49 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 107.00 Pounds
- Item Dimensions: 89.4 x 47.3 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L9Z-17D957-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mountaineer Bumper Cover Part Number: 6L9Z-17K835-CAPTM
$287.84 MSRP: $448.35You Save: $160.51 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cover
- Base No.: 17K835
- Item Weight: 11.10 Pounds
- Item Dimensions: 87.2 x 37.6 x 23.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L9Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mountaineer Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mountaineer Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mountaineer Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Mountaineer Bumper Parts Q&A
- Q: How to remove and replace the front bumper cover on 2007 Mercury Mountaineer?A: The first step to replace or remove the front bumper cover on Explorer Sport Trac series and Mountaineer requires headlamp assembly removal. Remove the electrical plugs from fog lamps along with side turn signal lamps on models that have this setup. Secondly you must remove front fender inner splash shield screws and pin-type retainers before proceeding to remove inner splash shields. The removal process calls for unscrewing the 2 bolts found under the bumper cover together with removing 6 scrivets that support the grille-to-grille opening panel. The fender clips stay with the front fender but you can use a flat-blade screwdriver to unlock the tabs which are attached to the bumper cover. The Mountaineer bumper cover upper screws must be removed first before rotating its bottom section upward while pressing down on the top portion until all 3 locking tabs disengage. Reinstallation of the front bumper cover requires following the reverse order of uninstallation.